Clay Paky SHOW-BATTEN 100 Instruction Manual
  1. Manuals
  2. Brands
  3. Clay Paky Manuals
  4. DJ Equipment
  5. SHOW-BATTEN 100
  6. Instruction manual

Clay Paky SHOW-BATTEN 100 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

INDEX
Page
Contents
2
4
4
4
6
8
15
18
19
20
21
Channel functions
SHOW BATTEN 100 AS
INSTRUCTIONS MANUAL
1
Congratulations on choosing a Clay Paky product!
We thank you for your choice. Please note that this product, as
all the others in the rich Clay Paky range, has been designed and
manufactured with total quality to ensure excellent performance
and best meet your expectations and requirements.
Carefully read this instruction manual in its entirety and keep it
safe for future reference.
It is essential to know the information and comply with the
instructions given in this manual in order to ensure the fitting is
installed, used and serviced correctly and safely.
CLAY PAKY S.p.A. disclaims all liability for damage to the
fitting or to the other property or persons deriving from
installation, use and maintenance that have not been carried
out in conformity with this instructions manual, which must
always accompany the fitting.
CLAY PAKY S.p.A. reserves the right to modify the
characteristics stated in this instructions manual at any time and
without prior notice.
C71085
C71086

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SHOW-BATTEN 100 and is the answer not in the manual?

Questions and answers

Related Manuals for Clay Paky SHOW-BATTEN 100

Summary of Contents for Clay Paky SHOW-BATTEN 100

  • Page 1: Table Of Contents

    We thank you for your choice. Please note that this product, as Page Contents all the others in the rich Clay Paky range, has been designed and manufactured with total quality to ensure excellent performance Safety Information and best meet your expectations and requirements.

  • Page 2: Safety Information

    SAFETY INFORMATION SHOW BATTEN 100 • Installation Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of anchorage is stable before positioning the projector. The safety chain must be properly hooked onto the fitting and secured to the framework, so that, if the primary support system fails, the fitting falls as little as possible.
  • Page 3 Ref: [FIS00O – Safety Information Show-Batten 100 & Show-Batten 100 AS] COME OTTENERE LE INFORMAZIONI DI SICUREZZA NELLA VERSIONE MULTILINGUE Puoi sempre scaricare la versione multilingue delle Informazioni di Sicurezza per questo prodotto Clay Paky al seguente link: http://www.claypaky.it/en Rif: [FIS00O –...

  • Page 4: Unpacking And Preparation

    UNPACKING AND PREPARATION 2 x 183102/805 2 x 183102/805 Packing content - Fig. 1 REMOVAL OF THE PROTECTIVE FILM INSTALLATION AND START-UP SHOW BATTEN 100 100 AS...
  • Page 5 Projector installation - Fig. 4 WARNING: the safety chain must be installed except when the projector rests on the floor. (Code 105015/801 available upon request). The projector can be installed on the floor resting on specific rubber feet, on a truss, on the ceiling or wall. This must be secured to the projector support structure and then hooked to the fastening point at the centre of the fixture.

  • Page 6: Control Panel

    Connecting and disconnecting the power cord - Fig. 5 CONTROL PANEL Power Supply Connections to the power mains - Fig. 6 Connections to the control signal line (DMX) - Fig. 7 Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ω characteristic impedance, 22-24 AWG, low capacity. Do not use microphone cable or other cable with characteristics differing from those specified.
  • Page 7 Switching on the projector - Fig. 8 The projector immediately turns on when the power cord is plugged. Clay Paky SHOW BATTEN 100 Address xxx * see pag. 12 SHOW BATTEN 100 Software release x.x x xxxxx ??? * The control panel (Figure 8) has a display and buttons for complete programming and management of the projector menu.

  • Page 8: Menu Setting

    MENU SETTING SHOW BATTEN 100 100 AS...
  • Page 9 Continued SHOW BATTEN 100 100 AS...
  • Page 10 SHOW BATTEN 100 100 AS...
  • Page 11 Continued SHOW BATTEN 100 100 AS...
  • Page 12 SHOW BATTEN 100 100 AS...
  • Page 13 Continued SHOW BATTEN 100 100 AS...
  • Page 14 SHOW BATTEN 100 100 AS...

  • Page 15: Maintenance

    MAINTENANCE 2 Fuses 6.3x32mm 2A-T (p/n 030472) Fuses replacing - Fig. 9 Each Show Batten has 2 fuses associated with the main power cord connection. Continued SHOW BATTEN 100 100 AS...
  • Page 16 Parts requiring frequent cleaning. Periodic cleaning - Fig. 10 To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The frequency with which the following operations are to be carried out depends on various factors such as wear and the work environment quality (air humidity, dust, salinity, etc.).
  • Page 17 Battery removal - Fig. 11 This product contains a rechargeable lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end of its life according to the regulation in force. LiFePO4 SHOW BATTEN 100 100 AS...

  • Page 18: Technical Data

    TECHNICAL DATA (3.94") 1000 (39.37") (7.32") (8.90") (6.69") Power supplies Weight Control and programming: • 100/240V 50/60 Hz 10 Kg (22 lbs) • DMX protocol signal: USITT DMX 512 IP rating • Automatic power supply • Display: LCD 2 lines with 16 characters each, Input power backlit LED, white on black •...

  • Page 19: Cause And Solution Of Problems

    CAUSE AND SOLUTION OF PROBLEMS THE PROJECTOR WILL NOT SWITCH ON TROUBLE THE PROJECTOR WILL NOT SWITCH ON DEFECTIVE PROJECTION POSSIBLE CAUSES CHECKS AND REMEDIES REDUCED LUMINOSITY No power supply. Check the power supply voltage. LED burnt out or defective. Call an authorised technician.

  • Page 20: Channel List

    CHANNEL LIST SHOW BATTEN 100 SHOW BATTEN 100 100 AS...
  • Page 21 CHANNEL FUNCTIONS Continued SHOW BATTEN 100 100 AS...
  • Page 22 SHOW BATTEN 100 100 AS...
  • Page 23 Continued SHOW BATTEN 100 100 AS...
  • Page 24 SHOW BATTEN 100 100 AS...
  • Page 25 SHOW BATTEN 100 100 AS...
  • Page 26 SHOW BATTEN 100 LED reference number for pixel mapping LED 10 LED 9 LED 8 LED 7 LED 6 LED 5 LED 4 LED 3 LED 2 LED 1 SHOW BATTEN 100 100 AS...
  • Page 27 CLAY PAKY - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it S.p.A.

This manual is also suitable for:

Show-batten 100 asC71085C71086

Table of Contents