Down Button Menu - Lectrosonics HMa Quick Start Manual

RF Power Output (Up Button Menu)
Pr (RF Power output) may be selected as either 100 or 50.
Selecting the Audio Polarity (Up Button Menu)
Selecting Step Size Mode (Up Button Menu)
The frequency increments can be set at either 25 kHz or 100 kHz.

DOWN Button Menu

Hold the DOWN button while powering up the unit. Then press the
AUDIO button repeatedly to scroll through the following settings. Use the UP
and DOWN arrow to select the available options under each setting.
Enable Remote Control
rc on and rc OFF enable and disable remote control functions. See page 7.
Power Back On (DOWN Button Menu)
PbAc (Power back on after power loss) allows the unit to either (1) turn back
on after power loss or (0) remain off.
LCD Backlight Setting (DOWN Button Menu)
The LCD backlight can be set to stay on continuously or turn off after either 5
minutes or 30 seconds
.
www.lectrosonics.com
The input to the transmitter can be set for
Pin 2
XLR Pin 2 as positive (+) or negative (–) to
(+)
match the polarity of other mics being used.
Pin 2
(–)
5