Panasonic AU-EVA1 Setup Manual page 5

AU-EVA1 SETUP GUIDE
EVA1 DIRECT Connection
Wi-Fi Direct enables devices to easily connect
with each other without requiring a wireless
access point. This method may be more
convenient depending on the situation.
Note:
AU-EVA1 only supports AJ-WM50 Wi-Fi dongle.
1: Press MENU button on side of camera.
Select NETWORK SETTINGS.
2: Select WLAN under NETWORK SEL.
3:
Select NETWORK PROPERTY followed
by TYPE.
4: Select DIRECT. Select desired network.
5: AU-EVA1 is the default SSID for your device
to connect to. 5GHz BAND is recommended
for demo use. Please take note of this.
6:
DHCP will switch to SERVER.
Default IP is 192.168.0.1
*Your IP ADDRESS may be different.
5