Panasonic AU-EVA1 Setup Manual page 2

AU-EVA1 SETUP GUIDE
EVA1 INFRA Connection
Wi-Fi INFRA connects devices with the use
of a wireless access point. All devices on the
network will communicate with the same
access point. This requires a network and
access point to be set up and running.
Note:
AU-EVA1 only supports AJ-WM50 Wi-Fi dongle.
2
1: Press MENU button on side of camera.
Select NETWORK SETTINGS.
2: Select WLAN under NETWORK SEL.
3:
Select NETWORK PROPERTY followed
by TYPE.
4: Select INFRA(SELECT). Select desired
network.
5: Enter network password under ENCRYPT
KEY. Camera will display white bars on
main screen when connected.
6:
DHCP will switch to CLIENT.
Default IP is 192.168.0.1
*Your IP ADDRESS may be different.