Mechanical Installation And Service; Contents; Liability - ABB ACS800 Hardware Manual

8

Mechanical installation and service

These instructions are intended for all who install and service the du/dt filter.
WARNING! Ignoring the following instructions can cause physical injury or death,
or damage to the equipment:
•
•
•
•

Contents

The chapters of this manual are briefly described below.
About this manual
Filter selection
Installation instructions
Technical data
installation.
Dimensional drawings

Liability

The installation examples in this manual are provided to help the installer in
designing his/her installation.
Note: The installation must always be designed and made according to applicable
local laws and regulations. ABB does not assume any liability whatsoever for any
installation which breaches the local laws and/or other regulations.
About this manual
The filter is heavy. Lift the filter by the lifting holes only.
Ensure sufficient cooling.
Ensure that the filter is grounded by the four fastening screws.
Beware of hot surfaces. The surface temperature of the du/dt filter can exceed
150 °C (302 °F) during operation. Let the filter cool off for two hours before
servicing it.
describes the manual.
advises on selecting the appropriate du/dt filter for the drive.
contains mechanical and electrical installation instructions.
contains the technical specifications of the du/dt filter and its
contains the dimensional drawings of the du/dt filters.