KING Jack OA8501 Owner's Manual
  1. Manuals
  2. Brands
  3. KING Jack Manuals
  4. Antenna
  5. OA8501
  6. Owner's manual

KING Jack OA8501 Owner's Manual

Low profile digital hdtv over-the-air antenna with built-in king surelock digital tv signal meter
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Low Profile Digital HDTV Over-the-Air Antenna
with built-in KING SureLock
OPERATION and AIMING THE ANTENNA ......................................................... 1
CONTENTS and EXTENSION INSTALLATION .................................................. 2
EXTERIOR BASE MOUNT INSTALLATION ....................................................... 3
INTERIOR ENCLOSURE INSTALLATION .......................................................... 4
POWER INSERTER INSTALLATION ..................................................................5
LIMITED WARRANTY .........................................................................................6
NOTE: Please read thru the installation instructions before beginning.
SPECIFICATIONS
Dimensions:
8.7" H x 16" W x 12.5" L
Weight:
2.62 lbs.
Power Requirement: 12 VDC / 100 mA
(supplied by KING Wall Mount Power Injector)
Thank you for choosing a KING Antenna!
CONTENTS
See page 2 for items supplied by the installer.
See page 5 for information on the MB8200 Mounting Plate
Digital TV Signal Meter
™
Owner's Manual
Roof Thickness: 1" to
Roof Thickness: 4-1/2" to 8"
(when installed with KING extension #21850)
OA8500 • White
OA8501 • Black
Frequency Bands:
VHF (54-216 MHz)
UHF (470-698 MHz)
FM (87.9-107.9 MHz)
Signal Meter Frequency Response: 54-698 MHz (Ch 2-51)
Enclosure/Mount:
ASA-Automotive grade
4-1/2"

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OA8501 and is the answer not in the manual?

Questions and answers

Related Manuals for KING Jack OA8501

Summary of Contents for KING Jack OA8501

  • Page 1: Table Of Contents

    Roof Thickness: 1” to Roof Thickness: 4-1/2” to 8” (when installed with KING extension #21850) OA8500 • White OA8501 • Black CONTENTS OPERATION and AIMING THE ANTENNA ............1 CONTENTS and EXTENSION INSTALLATION ..........2 EXTERIOR BASE MOUNT INSTALLATION ............3 INTERIOR ENCLOSURE INSTALLATION ............

  • Page 2: Operation And Aiming The Antenna

    OPERATION AIMING THE ANTENNA 1. Turn on TV and power injector (see above). 2. Turn on KING SureLock Signal Meter with switch on side of enclosure. 3. Press button and turn knob to rotate antenna in one direction until it hits the stop. 4.

  • Page 3: Contents And Extension Installation

    IMPORTANT! You must install the included wall mount power inserter to operate the KING Jack antenna (see page 5). EXTENSION INSTALLATION ROOFS 4 1/2” to 8” THICK ONLY! Roofs thinner than 4 1/2” go to next page. If your roof is 4-1/2” to 8” thick you will need to install KING extension #21850.

  • Page 4: Exterior Base Mount Installation

    EXTERIOR BASE MOUNT INSTALLATION IMPORTANT! The installer is responsible for determining and supplying the most appropriate fasteners to secure the base mount to the roof and weatherproofing all holes with roof-compatible sealant. 1. Select an area on the roof for the base mount keeping in mind the following IMPORTANT POINTS: a) The antenna should be mounted with the coax channel towards the rear of the vehicle.

  • Page 5: Interior Enclosure Installation

    INTERIOR ENCLOSURE INSTALLATION IMPORTANT! Before starting step 1, turn the adjustable connector in one direction until the antenna hits the stop. Now turn the connector all the way in the other direction until the antenna hits the stop again (slightly more than 360°). THE ANTENNA MUST ROTATE FREELY THRU THE ENTIRE DISTANCE.

  • Page 6: Power Inserter Installation

    POWER INSERTER INSTALLATION The Wall Mount Power Inserter: • Can be mounted in most standard electrical boxes. • Requires a +12 Volt DC power source. (Inadequate voltage may cause the green LED to not illuminate and the unit to not function properly. •...

  • Page 7: Limited Warranty

    IMPORTANT! Do not power wash any part of the KING Jack antenna head or base mount. Every new KING Jack HDTV Antenna System is thoroughly inspected and tested before leaving the factory, and is covered by the following limited warranty from the date of original purchase: •...
  • Page 8 Simply better, by design. ™ 11200 Hampshire Avenue South, Bloomington, MN 55438 PH 952.922.6889 || FAX 952.922.8424 || kingconnect.com © 2018 KING 22600 Rev B...

This manual is also suitable for:

Oa8500

Table of Contents

Save PDF