Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rosewill RP500-2
Summary of Contents for Rosewill RP500-2
-
Page 1: Power Supply
POWER SUPPLY PERFORMANCE Series USER Manual RP500-2 RP500-2-S RP550-2 RP550-2-S... -
Page 4: Specification
2.5A 12.0W 12.5W ±5% ±10% ±5% ±10% ±5% ±1% ±2% ±1% +12V2 -12V +5VSB 1.0A 0.0A 0.0A 1.0A 2.5A 12.0W 12.5W ±5% ±10% ±5% ±10% ±5% ±1% ±2% ±1% POWER SUPPLY © 2004-2006 Rosewill Inc. All rights reserved by Rosewill... - Page 5 2.2 Efficiency The power supply is a minimum of 72% efficient under typical load. The “Energy Star” efficiency of the power supply is a minimum of 50% when the AC input power is 60W. 2.3 Remote ON/OFF control The power supply DC outputs (with the exception of +5 VSB which is always available) are enabled with an active-low, TTL-compatible signal (“PS-ON”), When PS-ON is...
-
Page 6: Physical Environment
3.2 Short Circuit Protection A short circuit on any DC output will cause the power to latch. The power supply will withstand a continuous short circuit to the output without damage or overseers to the unit. The +5VSB can be shorted indefinitely and will recover automatically when the short is removed. -
Page 7: Regulatory Compliance
25A. 5.6 Reliability The power supply have a minimum predicted MTBF(MIL-STD-217E) of 100,000 hours of conditions operation at 25 , maximum-output load, and nominal AC input voltage. POWER SUPPLY © 2004-2006 Rosewill Inc. All rights reserved by Rosewill... - Page 8 • 8 pin EPS +12V Connector x 1 • 6 pin PCI-Express Connector x 1 • 4 pin Peripheral Connector X 8 • 5 pin SATA Connector x 2 • 4 pin Floppy Connector x 2 POWER SUPPLY © 2004-2006 Rosewill Inc. All rights reserved by Rosewill...
-
Page 9: Installation
2. 4 pin here is used for switching between 20 & 24 pin only. 20 pin Plug the 20 pin connector onto Take the 20 pin connector. the motherboard. POWER SUPPLY © 2004-2006 Rosewill Inc. All rights reserved by Rosewill... - Page 10 Plug the 4 pin part onto the motherboard NOTE : You can also hold 20 pin and 4 pin connectors together then plug them into the 24 pin socket POWER SUPPLY © 2004-2006 Rosewill Inc. All rights reserved by Rosewill...
- Page 11 The 4 pin Peripheral connector used for HDD, Optical Drive and other devices needing it. 7. 5 pin SATA Connector 5 pin SATA connector used for SATA HDD and Optical Drive. © 2004-2006 Rosewill Inc. All rights reserved by Rosewill POWER SUPPLY...
- Page 12 1=T= Fastest Speed (Great cooling but noisy) 2=A= Auto Control (Recommended) 3=L= Slowest Speed (Silent but bad cooling, NOT recommended) NOTE : Slowest Fan Speed may make the power supply & your system UN-stable. POWER SUPPLY © 2004-2006 Rosewill Inc. All rights reserved by Rosewill...
Need help?
Do you have a question about the RP500-2 and is the answer not in the manual?
Questions and answers