Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Rosewill Power Supply
Summary of Contents for Rosewill Power Supply
-
Page 2: Table Of Contents
3. 4+4 pin Connector... 4. 6 pin PCI-Express Connector... 5. 4 pin Molex Connector... 6. 4 pin Floppy Connector... 7. 5 pin SATA Connector... 8. Before starting your system... • Information... © 2004-2006 Rosewill Inc. All rights reserved by Rosewill User Manual... -
Page 3: Features Descriptions
• Dual PCI-Express Connectors for your SLI • Mirror Titanium Finish • Extreme 135mm cooling Fan • 4/8-pin +12v and EPS Connector • Four SATA Connectors • All cables with black mesh sleeving © 2004-2006 Rosewill Inc. All rights reserved by Rosewill User Manual... -
Page 5: Overall Performance
Short Circuit Protection Output power +3.3V, +5V, +12V are all protected by circuit protection. +12V1 +12V2 160W 368W ±5% ±5% Max(V) 14.5 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill -12V 0.6A 0.6A 7.2W 550W ±5% ±10% ±10% User Manual +5VSB 2.5A... -
Page 6: Insulation Resistance
Input to output : Min 50M Reliability MTBF : 100000 hours at 25°c ambient temperature. : 0°c to +80°c : 10% to 90% RH : 10% to 90% RH © 2004-2006 Rosewill Inc. All rights reserved by Rosewill User Manual... -
Page 7: Installation 1. Installing Power Supply
POWER SUPPLY Turbo series Installation 1.Installing Power supply Affix the power supply to the case with screws. 2. 20+4 pin Main Connector 20pin • Detach the 4 pin connector to have a 20 pin main connector • Plug the 20 pin connector onto the motherboard. -
Page 8: Pin Connector
1.Confirm 4 pin +12V or 8 pin EPS +12V connector your motherboard needs before the installation. 2.4 pin here CAN NOT be used for the main connector. © 2004-2006 Rosewill Inc. All rights reserved by Rosewill 8 pin • Combine two 4 pin connectors... -
Page 9: Pin Pci-Express Connector
6. 4 pin Floppy Connector The 4 pin Floppy connectors used for Floppy disk or Zip drives. 7. 5 pin SATA Connector 5 pin SATA connector used for SATA HDD and Optical Drive © 2004-2006 Rosewill Inc. All rights reserved by Rosewill User Manual... -
Page 10: Before Starting Your System
8. Before starting your system Select the proper voltage setting. ( Setting for United States is 115 Volt ) Attach the power core to the power supply Connect the power core to a power source. Confirm the power supply is on ©...
Need help?
Do you have a question about the Power Supply and is the answer not in the manual?
Questions and answers