Tilting Up The Outboard Motor; Fixing The Steering Direction - ePropulsion SPIRIT 1.0R User Manual

4.5 Tilting up the Outboard Motor

To tilt up, first screw off the lock nut to disconnect the Link Arm and Steering
Tube. Then pull up the trim release lever and take the battery handle to tilt up
the outboard motor to the maximum height. After a "click" sound, release the
battery handle and the outboard will tilt up to 75° position.
To lay down the outboard, hold the battery handle and pull up the Trim Release
Lever again to lay it back to the original position.
Figure 4-5
Never pull up the trim release lever when the propeller is rotating.
Careful handling is recommended when tilting up and down.
Tilt up the outboard out of water when the motor is not running.

4.6 Fixing the Steering Direction

Before attaching the battery, inserting the steering lock pin into the hole to fix
the steering direction. Use the pin if necessary.
Figure 4-7
Screw off
the lock nut
Insert the Steering
Lock Pin into
the hole
Figure 4-6
Steering direction
fixed in front.
21
Trim Release Lever
Figure 4-8