Panasonic KX-TD500 Installation Manual page 181

4.2.7 System Option
Value Range
Parameter
(default)
5 Limited call 1. Outgoing
duration calls only
2. Both calls
6 Transfer 1. Originating
recall extension
destination 2. Operator
7 Checking 1. No check
dial ,# by 2. Check
toll restriction
8 Confirmation 1. Enable
tone for 2. Disable
Override,
Barge-in and
Conference
9 Confirmation 1. Enable
tone for Call 2. Disable
Pickup,
Paging-
Answer,
TAFAS-
Answer, Hold
Retrieve and
Call Park
Retrieve
10 Station Speed 1. Name
Dialing Initial 2. Number
Display
4-42 System Programming
Specifies the type of calls which are restricted by
"Limited Call Duration" setting.
(1) [Note]
• This setting applies to the extension on which "Time
Limit of Outside Calls" is enabled by COS programming.
Specifies whether Transfer Recall occurs at the transfer
originating extension or at Operator Group extensions,
if the call (both inside and outside) transferred to an
(1) extension is not answered within a specified period of
time.
Specifies whether or not the system checks the user-
dialed " " and "#" during Toll Restriction procedure.
(2)
[Note]
• This assignment is required for certain Central Offices
(CO) to prevent toll fraud.
Some Central Office ignores the user-dialed " " and
"#". If your CO is such a type, select "No check."
Allows you to remove confirmation tone 4.
This tone is sent when a three-party conference is
(1) established/finished.
Allows you to remove Confirmation Tone 3.
This tone is sent when a conversation is established just
(1) after an extension user dials the feature number for
accessing the following features: Call Pickup, Paging,
Paging Answer, TAFAS Answer, Hold Retrieve and
Call Park Retrieve.
Specifies the Initial display of a large display DPT,
such as KX-T7235, in Station Speed Dialing.
(1)
Description/Function Reference
Limited Call
Duration
(F/G)
Call Transfer
Unscreened-
to Station
(F/G)
Toll
Restriction
(F/G)
Confirmation
Tone
(F/G)
Confirmation
Tone
(F/G)
(U/M) p.