Mitsubishi Electric FR-A800 Instruction Manual page 8

●Wiring and ferrule terminal specifications
Cable gauge (mm
0.3
0.5
0.75
1
1.25 / 1.5
0.75 (for two wires)
∗1 Ferrule terminals and the tool are distributed by Phoenix Contact Co., Ltd.
●Shorting wire
The shorting wire are installed between terminals S1/S2 and PC and between terminals SIC and SD in the initial
status as shown in Figure 3.
Before connecting the wires for the safety stop function to terminals S1, S2, and SIC, remove the shorting wires.
8
INSTALLATION AND WIRING
Table 5 Wiring and Ferrule terminal specifications
2
Ferrule terminal model
)
AI 0,34-10TQ
AI 0,5-10WH
AI 0,75-10GY
AI 1-10RD
AI1,5-10BK
AI TWIN 2 X 0,75-10GY
2 5 4 1 F/C +24 SD So SOC
AM 5 10E 10 SE SE RUN SU IPF OL FU
Figure3 Shorting wire
∗1
CRIMPFOX 6
SD SIC S1 S2 PC A1 B1 C1
PC RL RM RH RT AU STP MRS RES SD SD
Crimping tool name
A2 B2 C2
STF STR JOG CS
∗1