Mitsubishi Electric FR-A800 Instruction Manual page 4

Safety stop function with SIL 3 certification
The Mitsubishi Electric FR-A800/F800 inverters now comply with safety integrity level 3 (SIL 3) of the IEC
EC61508:2010 functional safety standard.
• Target models
Mitsubishi Electric FR-A800/F800 inverters
• Change of the compliance
The Mitsubishi Electric FR-A800/F800 inverters now comply with SIL 3.
Safety
performance ISO13849-1:2008 Category 3/PLd
(Standards IEC62061:2005 / IEC61800-5-2:2007 /
certified by a third- IEC61508 SIL2
party certification IEC60204-1:2010 / IEC61800-5-2:2007 Stop category 0
body)
• Schedule
Check the SERIAL number indicated on the inverter rating plate or package.
For the products manufactured in Japan, this change has been made sequentially from the June 2018 production.
For the products manufactured in China, this change has been made sequentially from the July 2018 production.
SERIAL
number
Country
of origin
• Third-party certification body
Safety Integrity Level (SIL) 3:
TÜV SÜD
Safety Integrity Level (SIL) 2:
TUV Rheinland as before, or TÜV SÜD alternatively.
Warning
 The misuse of safety function leads to personal injury or death, property damage, or economic loss.
To ensure that the system complies fully with requirement of safety, make a system-level risk
assessment. Mitsubishi Electric Corporation. cannot assume responsibility for any system to
comply with safety standards.
4
GENERAL DESCRIPTION
Table 1 Compliance with SIL 3
Before change
Figure 2 Rating plate example
The SERIAL consists of one symbol, two characters indicating the
production year and month, and six characters indicating the
control number.
The last digit of the production year is indicated as the Year, and
the Month is indicated by 1 to 9, X (October), Y (November), or Z
(December).
ISO13849-1:2015 Category 3/PLe
IEC62061:2015 / IEC61800-5-2:2016 /
IEC61508:2010 SIL3
IEC60204-1:2016 / IEC61800-5-2:2016 Stop category 0
   
Symbol Year Month Control number
SERIAL
After change