Rain Bird ESP-LXME Quick Reference Manual

ESP-LXME Controller Quick Reference Guide
1. Watering Start Times
STEPS REQUIRED 2. Days To Water
3. Station Run Times
FOR OPERATION:
To verify: turn dial to Test All Stations / Check
select Confirm Programs and review the Program Summary.
Basic Programming
1
Set Language
Special Features
4 Set Watering Start Times
Set Watering Start Times
Manual Watering
Start Station
Manual Watering
Troubleshooting
Test All Stations / Check System
·
Confirm Programs
° Program Summary
Review Program
°
° Program Run Time
Test All Stations / Check System Station RunTime
°
·
Test All Stations
·
Raster Wiring Test
Programming Questions?
Call 1-800-RAINBIRD
www.rainbird.com/ESPLXME
System,
2
Set Current Date
Set Current Date
5 Set Days To Water - Custom Cycle
1
MON
2
TUE
WED 3
THU
4
FRI
5
SAT
6
SUN
7
Manual Watering Options
Manual Watering
Start Program
Manual Watering
Alerts user to conditions
that prevent watering.
See the Alarm button in the
Auto dial position for alarm
messages.
Alarm Message Action
Run Raster Test - turn dial
Station Short
to Test All Stations.
No Modules or
Check / reinsert modules.
No Base Module
Flow Alarm (only if
Turn dial to Module Status
optional Flow Smart
and select View Flow Alarms.
Module is installed)
3
Set Current Time
Set Current Time
Watering Day Cycles
OR
·
CU S TOM
·
ODD
·
ODD31
·
EVEN
Advanced Settings
·
CYCLI CAL
AUTO
AUTO
Station and Base Module LED
Flashing Module not recognized - reinstall.
(red) Station Short - run Raster Test.
Recognizing module properly.
Solid
Programming a station.
(red)
Station is currently running.
No controller power.
LED not lit No station activity - check Run Time,
(dark) Start Time and/or Days to Water.
Module not recognized - reinstall.
Optional Flow Smart Module LED
Flashing Active flow being monitored
(blue) by flow sensor.
PMS 348 + HALFTONES
BLACK + HALFTONES
6
Set Station Run Times
Set Station Run Times
To Cancel OFF
3 Seconds
To Cancel
OFF
3 Seconds
P/N: 637762-11