Advertisement
SunStar ZX32 Speaker Installation Instructions
This procedure explains how to install speakers on a 2002, and newer, model unit.
Disconnect the fan wire from the fan. On
the end of the wire is a connector which
simply plugs onto the fan terminals.
Disassemble the head end rear fan
module by removing the four screws that
hold it in place (see below). Be careful of
the fan wires as you pull the fan module
from the bed.
Remove these four screws
24148-06A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SunStar ZX32
Summary of Contents for SunStar ZX32
- Page 1 SunStar ZX32 Speaker Installation Instructions This procedure explains how to install speakers on a 2002, and newer, model unit. Disassemble the head end rear fan module by removing the four screws that hold it in place (see below). Be careful of the fan wires as you pull the fan module from the bed.
- Page 2 Attach a speaker to the inside of the speaker bracket, as shown at left, using four #8-32 x 1/2” screws and nuts. Do the same for the other speaker. The speaker wires provided with this kit are 10’ long to allow connection to a stereo in front of the unit.
Need help?
Do you have a question about the ZX32 and is the answer not in the manual?
Questions and answers