NETGEAR Nighthawk Quick Start

Quick Start

Nighthawk
AC1900 WiFi VDSL/ADSL Modem Router
Model D7000v2

Package Contents

Modem router
Antennas (3)
Phone cable Ethernet cable
1. Find Your ISP Account Login Information
Find your Internet service provider (ISP) account login information, such as your ISP user name
and password. You might need this information to se tup your modem router. If you do not know
your ISP account login information, contact your ISP.

2. Attach the Antennas

45°
Attach and tighten the antennas on the threaded antenna posts.
Position the antennas as shown.
3. Plug In Your Modem Router
DSL microfiilter
(varies by region)
Connect the modem router DSL port to a DSL outlet.
If your package includes a DSL microfilter, install the DSL microfilter and connect it
Power adapter
to the modem router DSL port. You can connect a phone to the DSL microfilter.
(varies by region)
Connect the power adapter to the modem router and press the Power button.
The Power LED
Wait one or two minutes for the DSL LED
If the DSL LED does not light, your DSL line might be a bonded pair line, which is
not compatible with the modem router.

4. Connect to the Internet

You can either use an Ethernet cable or connect with WiFi to the modem router.
To connect with WiFi:
Make sure that the WiFi LED
network name and password are on the modem router label.
45°
Open the WiFi connection manager on your WiFi-enabled computer or
mobile device, find the modem router's WiFi network name, and use the
modem router's password to connect.
Launch a web browser. If the NETGEAR installation assistant does not display, visit
www.routerlogin.net. If a login window displays, enter admin for the user name
and password for the password.
Follow the NETGEAR installation assistant steps to connect to the Internet.
If the modem router does not connect to the Internet, see the user manual,
available online at support.netgear.com, or visit
lights white.
to light white.
on the modem router is lit. The WiFi
community.netgear.com for help.