SIZZIX BigKick User Manual

TM
TM

Assembly Instructions

Before attaching handle, remove protective
cap on crank shaft and discard. Then
attach handle by sliding washer over hex
screw and insert through handle and into
crank shaft. Tighten hex screw with hex
wrench provided with handle kit. Press end
plug over hex screw until firmly sealed.
Using a Sizzlits or Clearlits Die
Place Sizzlits Die onto a Cutting Pad with foam
side up. Place paper over the die. Place another
Cutting Pad over the paper to create a
"sandwich." For Clearlits Die, place die over photo
or material so that the area to be cut shows
through the die. Then place photo or material and
die between Cutting Pads to make sandwich.
Paper
Die
Multipurpose Platform
(Tab 1)
®
The Sizzix BIGkick™ is exactly what crafters have been looking for –
a versatile, easy to use and affordable multipurpose creative system.
Designed to cut and emboss for creating unlimited fun projects. Using
the Sizzix Originals™, Bigz™, Sizzlits
Dies as well as Simple Impressions™ Embossing Folders, crafters
can now express their creative voice in minutes. Start unleashing the
limitless possibilities of your BIGkick to create a combination of
dazzling designs.
Place sandwich on Multipurpose Platform and slide
Platform into opening of BIGkick. Note the rotation of
the handle and continue to rotate it in the same
direction until the Platform has passed through the
opening and the rollers. Remove Platform from
BIGkick. Your die-cut shape is ready to use!
Cutting
Pads
Multipurpose Platform
Page 1 of 3
® , Clearlits™ and Embosslits™
Handle
"Sandwich" "Sandwich"