NU-HX100S
COUNTERTOP INDUCTION OVEN (CIO)
QUICK START GUIDE
SET UP YOUR NEW COUNTERTOP INDUCTION OVEN IN 3 QUICK STEPS
1
Remove oven from box
Place on a countertop—allow 6" of space
on the top of the oven, 4" on the left and
the other side being open.
Remove all paper and packaging from
interior of oven
CONTROL PANEL PARTS AND FUNCTIONS
1 Display Window (See page 10 in Owner's Manual)
2 Grill (pages 15–16)
3 Broil (page 17)
4 Combo (pages 18–19)
5 Auto Cook (pages 22–25)
6 Bake (page 20)
7 Setup (pages 12–13)
8 More/Less (page 22)
9 Timer (page 21)
10 Stop/Reset
11 Start/Select Dial
CLEANING TIPS
BEFORE CLEANING: Unplug oven at wall outlet.
INTERIOR WALLS: Always wipe down oven interior after use. Clean with a damp cloth or paper towel. Do not use harsh detergents or abrasives.
GRILL PAN: After using, remove Grill Pan and clean with a mild detergent or dishwasher. Do not use abrasive cleaners.
DRIP TRAY: Remove the plastic tray and wash in warm soapy water. Do not use a dishwasher to clean the drip tray.
When oven interior is soiled, add ½ cup (4 FL oz) water into Grill Pan and place in oven. Then preheat oven at 450 F. After preheating, let oven fully cool down.
Wipe with a damp cloth.
Any fat and grease that builds up on the ceiling and walls of oven will begin to "SMOKE" if not cleaned properly. The smoke will disappear after a few minutes.
2
Place Grill Pan in oven
3
2
5
8
9
3
Plug oven into a grounded dedicated
15 AMP or 20 AMP, 120 VOLT, 60 Hz wall
outlet
"WELCOME" should display on screen
APPROVED COOKWARE
1
4
6
Heat resistant oven
7
glassware/ceramic
10
11
Household aluminum foil
*Only use in Bake mode. Check heat-resistant temperature of silica
gel container before baking.
Aluminum and other
metal containers
Use together with Grill Plate.
Meal containers with resin
handles cannot be used.
High-heat
silicone containers*