Schweitzer Engineering SEL-3355-2 Getting Started page 11

Step 2. The User Account Control may ask for confirmation that you understand the program being
launched can be used to make changes to the computer. Click Yes, or provide your account
credentials, to indicate that it is acceptable to proceed.
Step 3. Verify that all the software packages ordered with the computer are listed.
For an SEL-3355-2 With No Operating System
If the SEL-3355-2 does not have a bootable operating system installed, it will boot to an EFI Shell similar to the
following figure.
Perform the following steps to verify that all the SATA drives are installed:
Step 1. Restart the SEL-3355-2 and press <F2> to enter BIOS setup.
Step 2. In the System Configuration menu, select SATA Configuration and then verify that the expected
SATA drives are listed in Slots 1–4.
Step 3. Perform Step 4 on page 9 through Step 6 on page 9 if any of the expected SATA drives are not
listed.
Date Code 20180212 Getting Started With the SEL-3355-2
11