Table of Contents
Advertisement
Quick Links
Total Pool Chemistry
T M
for
Aqua Rite Pro
T M
and
Pro Logic
®
Questions?
www.goldlinecontrols.com
Refer to
for latest
manual revisions, additional information and helpful service.
Installation and Operation Manual
Work less, play more
T M
for
AQL-CHEM
June 2010
Download and use
the latest manual at:
www.hayward-pool.com
092332E RevG
Copyright © 2010 Hayward
North Kingstown, RI 02852 USA
Advertisement
Table of Contents
Related Manuals for Hayward AQL-CHEM
Summary of Contents for Hayward AQL-CHEM
- Page 1 Refer to for latest manual revisions, additional information and helpful service. Installation and Operation Manual Work less, play more AQL-CHEM June 2010 Download and use the latest manual at: www.hayward-pool.com 092332E RevG Copyright © 2010 Hayward North Kingstown, RI 02852 USA...
-
Page 2: What's Included
E-Command pool automation products as well as its Aqua Rite, Aqua Rite Pro, The AQL-CHEM is an ORP and pH sensing kit that is offered as an accessory for all Aqua Plus and SwimPure chlorination products to be free of defects in materials and Hayward Aqua Rite Pro chlorine generators and Pro Logic pool controls. -
Page 3: Materials Needed For Installation
The AQL-CHEM is compatible with all Hayward Aqua Rite Pro and Pro Logic pool controls. An AQL-CL chemistry kit must be used with the Pro Logic if automatic chlorine generation is desired. The AQL-CHEM is not compatible with Aqua Rite or Aqua Logic controls. - Page 4 3 mounting holes through the Pro Logic enclosure. A drill template is included with the AQL-CHEM to assist with the positioning of the holes. After drilling, be sure to remove any burrs and brush away any metal shavings. Route Probe Cell cable through the access hole at the bottom of the mounting bracket BEFORE screwing the bracket in place.
-
Page 5: Normal Operation
Remote surface mounting the AQL-CHEM: The Probe Cell can be mounted up to 15' Normal Operation away from the Aqua Rite Pro or the Pro Logic (limited by length of cable). Use the During normal operation, the AQL-CHEM will sense ORP and pH requiring no user four mounting holes on the back of the bracket when surfacing mounting. - Page 6 If the probes are allowed to dry out, they will into the water, causing an equipment and health hazard which would not be detect- fail and the AQL-CHEM will be ineffective. After installation, the Probe Cell will en- able without the use of independent pH measurement.
-
Page 7: Operation
Operation Before operating the AQL-CHEM, test and adjust the pool water chemistry to the Aqua Rite Pro recommended levels in the Aqua Rite Pro or Pro Logic Operation manuals. This is an important step and is crucial to the successful operation of the AQL-CHEM. Adjust... - Page 8 Test the pH of the pool water with a dependable quality test kit after the pool pump has been running for a period of time. Hayward suggests that you take more than one test and average the results before entering the value in the pH Calibration Wizard.
- Page 9 AQL-CHEM kit must be installed and used to control the pH allows the pool owner to evaluate the pool chemistry before continuing with pH dispensing device on these models.
- Page 10 Configuring the Aqua Rite Pro or Pro Logic After the AQL-CHEM is mounted, plumbed and wired, the Aqua Rite Pro or Pro Logic must be configured using the Chemistry Config. Wizard and pH Calibration Wizard. These wizards are found in the Settings Menu of the Aqua Rite Pro. For the Pro Logic, the Chemistry Config.
Need help?
Do you have a question about the AQL-CHEM and is the answer not in the manual?
Questions and answers