Assign VU Meter channels
Next, we will configure the AES/EBU channels for the VU meter. Choose each Monitor
Matrix Output channel for the Source 1-6, and then Downmix Meter L and R for Source 7
and 8 respectively.
[Patch – Output Patch]
Assign the input microphones
Next, we will patch the microphones to the MMP1's Channel Strips, process those signals
using EQ, Compressor etc., and send them to DAW inputs via Dante (earlier in 7-1.3, we
have patched those Dante outputs to Dante Accelerator so they can be input to the DAW).
[Patch – Input Patch]
79