Yamaha MMP1 Setup Manual page 16

11. Sub Computer (computer for system configurations)
Prepare another computer for configuring the system by using MMP1 Editor, Dante
Controller (explained later) and so on. One computer (as described in 10.) can handle these
configurations, however, if you are concerned about the performance of DAW, use a
separate computer.
[Laptop PC (image courtesy of Apple Inc.)]
12. Apple iPad
Use an iPad for MMP1 Controller. For connecting to MMP1, you can choose either wireless
connection by using a Wi-Fi access point or wired connection by using LAN cable. A Wi-Fi
router can be used, but if that is the case, use the router in the Bridge mode (instead of
Router mode) which disables the routing functions. For wired connection, some adaptors
will be required to connect iPad and the network switch.
[Apple iPad and adaptors (images courtesy of Apple Inc.)]
16