Huawei HiLink K3773 Quick Start

Hspa usb stick

Download this manual

HiLink K3773 HSPA USB Stick

Thank you for choosing this USB Stick. With the USB Stick, you

can access the Internet through wireless network at a high

speed.

Note:

This manual describes the appearance of the USB Stick, as well as the procedures for preparation, and

connection steps.

The following figure shows the appearance of the USB Stick. It is only for your reference. The actual

product may differ.

Strap Hole

You can tie the cap and the USB Stick together by threading a strap through the strap holes, so that the

cap will not be easily lost.

It connects the USB Stick to a PC.

Indicator

It indicates the status of the USB Stick.

Green, blinking twice every 3s: The USB Stick is powered on.

Green, blinking once every 3s: The USB Stick is registering with a 2G network.

Blue, blinking once every 3s: The USB Stick is registering with a 3G/3G+ network.

Green, solid: The USB Stick is connected to a 2G network.

Blue, solid: The USB Stick is connected to a 3G network.

Cyan, solid: The USB Stick is connected to a 3G+ network.

Off: The USB Stick is removed.

Quick Start

Page 1: Quick Start
HiLink K3773 HSPA USB Stick Quick Start Thank you for choosing this USB Stick. With the USB Stick, you can access the Internet through wireless network at a high speed. Note: This manual describes the appearance of the USB Stick, as well as the procedures for preparation, and connection steps.
Page 2: Disconnect From The Network
SIM/USIM Card Slot It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module (USIM) card. Getting Your USB Stick Ready Install the SIM/USIM card Slide the front cover to remove it from the USB Stick. Insert the SIM/USIM card into the card slot, as shown in the following figure. Replace the front cover and slide it into place.