GE MicroVersaTrip Plus User Manual page 3

WARNINGS
Warning notices are used in this publication to emphasize that hazardous voltages, cur-
rents, or other conditions that could cause personal injury exist in this equipment or may
be associated with its use.
Warning notices are also used for situations in which inattention or lack of equipment
knowledge could cause either personal injury or damage to equipment.
CAUTIONS
Caution notices are used for situations in which equipment might be damaged if care is
not taken.
NOTES
Notes call attention to information that is especially significant to understanding and
operating the equipment.
This document is based on information available at the time of its publication. While
efforts have been made to ensure accuracy, the information contained herein does not
cover all details or variations in hardware and software, nor does it provide for every pos-
sible contingency in connection with installation, operation, and maintenance. Features
may be described herein that are not present in all hardware and software systems. GE
Electrical Distribution & Control assumes no obligation of notice to holders of this docu-
ment with respect to changes subsequently made.
GE Electrical Distribution & Control makes no representation or warranty, expressed,
implied, or statutory, with respect to, and assumes no responsibility for the accuracy,
completeness, sufficiency, or usefulness of the information contained herein. No warran-
tees of merchantability or fitness for purpose shall apply.
The following are trademarks of GE Company:
MicroVersaTrip Plus™, MicroVersaTrip PM™, Power Break®, Spectra RMS™, Epic™,
POWER LEADER™
GEH–6273E
WARNINGS, CAUTIONS, AND NOTES
AS USED IN THIS PUBLICATION
©Copyright 1996 GE Company
All Rights Reserved
i