Maintenance Check List; Parts & Service Information; Replacement Parts Diagram & List - The Basement Watchdog Big Combo Instruction Manual & Safety Warnings

notifications of potential problems and needed
maintenance while away from home. There are
currently two modules that can be connected:
Basement Watchdog WiFi Module
(Model No. BW-WiFi)
• Sends emails or text notifications and status
alerts to your phone, tablet or computer
• No required monthly or yearly fees or
subscriptions
Model No. BW-WiFi
Basement Watchdog
Home Automation Module
(Model No. BW-HZM)
• Easily connects to compatible monitored
security or home automation system
• Connects using
Z-Wave Plus
Model No. BW-HZM
For more information, please visit
www.BasementWatchdog.com
Page 13

MAINTENANCE CHECK LIST

Maintenance should be performed 1-2 times per
year
1. Lift the float switch as described at left.
2. Remove all debris from the bottom of the pit
and pump strainers.
3. Remove all debris from the water.
4. Remove all debris from the float switch.
5. Fill the pit with water. Make sure the pump
turns on at the intended level.
6. While the pump is running, make sure the pump
is evacuating water at a good pace and water is
coming out of the 1/8" air bleed hole.
7. Remove the fluid sensor and yellow cap from the
battery and rinse any residue buildup from the
bottom of the battery cap. Replace the cap and
fluid sensor.
8. Check battery fluid levels once every four
months.
PARTS & SERVICE INFORMATION
You can receive technical support, parts or service
information by calling Glentronics, Inc. at 800-
991-0466, option 3, or by visiting the website at
www.basementwatchdog.com. Send your unit to
the following address for repairs:
Glentronics, Inc.
645 Heathrow Drive, Lincolnshire, IL 60069
Replacement Parts List
Description Part No.
1/2 HP AC sump pump BW1050-GL
Caged dual float switch with
piggyback controller BWC2
Backup pump 1011002
Backup control unit BWSP-A
"Y" PVC pipe fitting 1120007
Support bracket for backup pump 1121006
Battery cap with hole for the
fluid sensor 1125000
Charger for backup pump 1015001
Backup dual float switch 1020009
BOTTOM VIEW
SIDE VIEW
Description Part No.
Backup pump locking screw
(#12 x 1/2" pan head)* 1100018
1-1/4" check valve for backup pump* 1141000
1-1/2" check valve for primary pump* 1141001
No-hub stainless steel connectors* 1142000
1-1/2" rubber union* 1142001
2" hose clamp* 1122002
Cable tie* 1122000
*Stock items available in plumbing department
Call 800-991-0466, option 3 to order parts.