Using Magic Files - Universal Robots UR5 Service Manual

4.3 Using Magic files

For easy backup, Universal Robots provides Magic files to automatically copy data from controller to USB-
stick.
These files are available:
•
URmagic log file
•
URmagic backup programs
•
URmagic configuration files
•
URmagic upload programs
•
URmagic screenshot
Go to www.universal-robots.com/support/
Instruction for using Magic files.
1. Download Magic file.
2. Save it in the root folder on a USB-stick.
If more than one Magic file is on USB-stick, they will be run in sequence; the warnings will then
appear for each file. Do not remove the USB-stick until after the last file has been run. Multiple
folders will be created and named with serial number plus a sequential no, e.g. 201430xxxx_0,
201430xxxx_1 etc.
3. Insert USB-stick into USB-connector on right-hand side of teach pendant.
4. After a few seconds a red
the USB-stick, while the file will do its magic.
5. Await a green <- USB
stick then go to step 4.
6. After the last Magic file is completed the USB-stick can be safely removed.
7. Remove USB-stick and the process is complete.
The Magic file creates a folder on USB-stick named with the serial number of the robot.
All rights reserved
Function:
copies the entire log history file to USB-stick
copies all programs and installation files to USB-stick
copies all configuration files to USB-stick
copies all programs and installation files from USB-stick
generates a screenshot of GUI when USB-stick is inserted
to download Magic files.
! USB ! -sign will appear on the screen, this is a warning not to remove
-sign appears on the screen, if there is more than one Magic file on the USB-
87 Servicemanual_UR5_en_3.2.0