Installation Instructions - Air Oasis BP2400-110 Owner's Manual

Installation Instructions

Preparing to Install Your New Bi-Polar 2400 unit
®
The Bi-Polar was designed to be simple and effective. Remove the unit & mounting
®
hardware (two self tapping screws) from the box. We recommend keeping the box
and all packaging material for shipping the unit, should it ever need to be returned
for repairs. Locate the ideal location within the air stream. We recommend after a
prefilter but before the cooling coil. Alternately, it can be mounted in the supply air.
Caution
Installation and servicing of air-conditioning equipment can be hazardous
due to system pressure and electrical components. Only trained and qualified
service personnel should install, repair, or service air-conditioning equipment. Air
Oasis and its affiliates are not responsible for any damage to the Bi-Polar unit,
®
or injury to yourself or others, if you elect to install the device without utilizing
qualified technicians.
Use the suggestions on page 3 to determine the optimal mounting location(s).
To complete the installation process you will need the following tools:
• 1/4 inch hex head screw driver
Should be installed with brushes a minimum of 2 to 3 inches away from any
metal objects or high voltage wires. Install the Bi-Polar where the air can
®
easily flow through the brushes. (Please see image below)
4