Warning Symbol; Reading The History - berlinger Fridge-tag 2 Operation Manual
With internal sensor
Hide thumbs
Also See for Fridge-tag 2:
- User manual (121 pages) ,
- Operation manual (35 pages) ,
- Installing (16 pages)
Table of Contents
Advertisement
Example of ALARM Display - during measurement
>+8°C
(10hrs)
<-0.5C
(60min)
Alarm state
=OK
SET
If the temperature and time conditions are outside the preset alarm
=ALARM
parameters the following will be displayed on the screen:
• The ( ) OK symbol will be replaced by (X) ALARM symbol
• An additional arrow will be indicated in the upper display area
to show which ALARM limit has been violated and on which
day.
• In addition to the (X) ALARM symbol the
warning symbol (!) will appear beside the (X).
8) Warning symbol
Option 1: The warning symbol will remain visible until the user
reads the details of the triggered alarm/s from the display. After that
it will disappear. ALARM indications cannot be cancelled nor reset.
Option 2: The warning and ALARM symbol (X) will remain
visible until the user reads the details of the triggered alarm/s
from the display. After that both symbols will disappear and
the display will go back to the OK Symbol ( ).
Note: How the ALARM symbol (X) and the warning symbol
react is specified in the configuration of the device.
9) Reading the History
The information of the temperature excursions can either be
viewed for the past 30 days directly on the device or for 60 days on
the generated files (PDF/ASCII).
1
6
09
2
!
1 42
5
Time / Alarm duration
Fridge-tag 2
®
BAAA00001
0
1
2
Int.Sensor
088
Temperatur / Min. - Max
READ
8
8
88
!
8888
°C
8
8
!
8888
2
0
8
8
Ext.
Int.Sensor
1 - 888
max.
min.
88
2
0
8
max
min.
Sensor
°F
°C
23
Advertisement
Table of Contents
Need help?
Do you have a question about the Fridge-tag 2 and is the answer not in the manual?
Questions and answers
hi, my fridge tag 2l has a triangle with exclamation point, but still has a check mark, How do I correct this?
The triangle with an exclamation point on the Fridge-tag® 2 is a warning symbol. If the device still shows a check mark (OK symbol), it means that although a warning condition occurred, the overall status is still acceptable.
To clear the warning symbol:
- Read the details of the triggered alarm or warning from the display.
- After viewing, the warning symbol and any alarm symbol (if present) will disappear, and the display will return to the OK symbol.
Note: The behavior of the symbols is based on the device’s configuration and cannot be reset manually.
This answer is automatically generated