Figure 3-5 Mounting Location Of The Pn-Ap00 Card - NEC Neax 2000 IVS System Manual

INSTALLATION
STEP 2: Mount the PN-AP00 card in any one of the AP slots in PIM0 – PIM7.
After mounting, set the SENSE switch to an unequipped slot number in
CM05;Set the MB switch to the down position to put the card in service. For de-
tails on mounting location, refer to the Circuit Card Manual.
PIM 0 ~ 7
PN-AP00
• MOUNT THE PN-AP00 CARD IN ANY ONE OF THE AP SLOTS (AP0 – AP8).
• SET THE SENSE SWITCH OF PN-AP00 CARD TO AN UNEQUIPPED SLOT NUMBER TO WATCH CM05 AS SHOWN BELOW.
SLOT NUMBER
SWITCH SETTING VALUE
CHAPTER 3
Page 20
Revision 1.0
BUILT-IN BATTERY
04 05
4 5

Figure 3-5 Mounting Location of the PN-AP00 Card

ND-45895 (E)
06 07 08 09 10 11
6 7 8 9 A B
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
PWR
12 13 14 15
C D E F