Calling The Plc Error Table For Diagnosis - HEIDENHAIN iTNC 530 Service Manual

10.4 Calling the PLC Error Table for Diagnosis

Introduction The machine manufacturer defines the PLC error messages in the PLC-ERROR-TABLE.
This PLC error table has the extension .PET.
The name and path of the PLC error table is shown in the PLC main menu.
You may open the corresponding file to learn more about the PLC error messages!
Calling the PET 
table

Example for a PET
table
May 2006
DANGER
The PET table may only be opened for the purpose of fault diagnosis.
Under no circumstances may the settings be changed, as this will alter the performance of
the machine!
This could lead to damage to property or persons!
Enter the PLC code number. --> see "Code Numbers" on page 3 – 13
Read the name and path of the PLC error table on the PLC main menu now displayed.
 Call the program management
 Select the PLC error table (z.B. PLC:\LANGUAGE\ERR_TAB.PET) with the arrow
keys.
 Confirm.
10 – 91