Hardware Reset; Specifications - Moxa Technologies VPort 351 Series Quick Installation Manual

PTZ
GREEN

Hardware Reset

A recessed RESET button is provided for restoring the system to the factory
default settings. When the system fails to install properly, or operates
abnormally, push the RESET button located on the top panel of the VPort 351
to restore the factory defaults.
To restore the VPort 351 to the factory default settings, use a pointed object,
such as a straightened paper clip or toothpick, to press the reset button
continuously. When the STAT LED blinks in red, release the reset button. At
this point, the POST process will run, and the VPort will reboot. The STAT
LED will light in green when the VPort has finished rebooting.

Specifications

Video
Video Compression
Video Input
Video Output
NTSC/PAL
Video Resolution and FPS (Frames per second):
QVGA 320 x 240
CIF 352 x 240
640 x 480
VGA
4CIF* 704 x 480
Full D1 720 x 480
* 4CIF will be supported after the release of the V2.0 firmware.
Video Viewing
Audio
Audio Input
Audio Output
Network
Protocols
Ethernet
On
Off
MPEG4, MJPEG*
(*MJPEG will be supported after the release of
the V2.0 firmware)
1, BNC Connector
1, Loop-through BNC Connector
Auto-sensing or Manual
NTSC
Size Max. FPS
30
30
30
30
30
Adjustable image size and quality
Timestamp and text overlay
1 Line-in or MIC-in, 3.5 mm phone jack
1 Line-out, 3.5 mm phone jack
TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP,
DNS, DHCP, UPnP, RTP, RTSP, ICMP,
IGMPv3, SNMPv3*, PPPoE*, DDNS*
(SNMP, PPPoE, and DDNS will be supported
after the release of the V2.0 firmware)
1 10/100BaseT(X) auto negotiating RJ45 port, or
1 100BaseFX fiber port (SC connector)
RS-232 or RS-485 signals are
being transmitted
RS-232 or RS-485 signals are not
being transmitted or have not been
detected
PAL
Size
320 x 288
352 x 288
640 x 480
704 x 576
720 x 576
— 16 —
Max. FPS
25
25
25
25
25