Hardware (Packed With The Unit) - Toshiba RAC-WK0511CMU User Manual

Preliminary Instructions (cont.)
SASH
19" MIN.
1/2" MIN.
Storm Window Frame
or Other Obstruction

Hardware (Packed with the unit)

7/16" Locking screw and Flat
washer for window
3/4" (or 1/2") Long
Hex-head Screw
Safety Lock
1/2" Long screw
and Locknut
3/4" Long Flathead Bolt
and Locknut
Sill Angle Bracket
Long hex-head locking screw
for top rail, side retainer
5/16" Length
Foam insert
Window sash seal foam
R1 hardware
Weather stripping
(10" *3/4" *1/12" )
Page 20
1. Check window opening size - the mounting parts furnished with
Fig. D
this air conditioner are made to install in a wooden sill double-
hung window. The standard parts are for window dimensions
listed above. Open sash to a minimum of 19" (483 mm). See Fig. D.
2. Check condition of window - all wood parts of window must be
in good shape and able to fi rmly hold the needed screws. If not,
make repairs before installing unit.
3. Check for anything that could block airfl ow - check area outside
of window for things such as shrubs, trees, or awnings. Inside, be
sure furniture, drapes, or blinds will not stop proper airfl ow.
4. Check the available electrical service - Power supply must be the
same as that shown on the unit serial nameplate. Power cord is 48
in long. Be sure you have an outlet nearby.
5. Carefully unpack air conditioner - Remove all packing material.
Protect fl oor or carpet from damage. Two people should be used
to move and install unit.
2 ea.
panels
7
1
4 ea.
2 ea.
2
10
2
1
2
5
NOTE
R1 hardware and weather stripping is for
ENERGY STAR models only.
Tools Required
A large fl athead screwdriver, Tape measure,
Adjustable wrench or pliers, Pencil, Level, Socket
wrenches, Phillips screwdriver
User Manual