Image Configuration; Osd Settings; Image Settings - Provision ISR Ossia NVR5 Series User Manual

Live Preview Introduction

5.3 Image Configuration

5.3.1 OSD Settings

Click StartSettingsCameraImageOSD Settings to go to the interface shown below.
Select the camera, input the camera name (or double click the camera name in the camera list
to edit the camera's name), enable or disable the name and time OSD (if enabled, drag the red
name and time OSDs in the image view area to change the OSDs' display position) and select
the date and time formats. Click "Apply" to save the settings.

5.3.2 Image Settings

Click StartSettingsCameraImageImage Settings.
Select the camera and set the image brightness, contrast, saturation and hue. You can click
"Default" button to restore the image settings to the default factory settings.
35
User Manual