Using For The First Time; Cleaning The Drawer For The First Time; Heating Up The Drawer For The First Time - Miele ESW 6114 Operating And Installation Instructions

 Please stick the extra data plate for
the appliance supplied with this
documentation in the space provided
in the "After sales service, data plate,
warranty" section of this booklet.
Alternatively, the additional label can
be stuck near the appliance if the
appliance markings are not visible
after installation.
 Remove any protective wrapping and
stickers (but not the data plate).
Cleaning the drawer for the
first time
 Remove the anti-slip mat and the
rack, if present, from the drawer and
clean them with warm water and a
little washing-up liquid applied with a
clean sponge or clean, damp
microfibre cloth.
 Dry the mat and the rack with a soft
cloth.
 Wipe the drawer inside and out with a
damp cloth to remove any dust or
left-over packaging.
 Dry all surfaces with a soft cloth.
 Refit the anti-slip mat and the rack (if
applicable) in the drawer.

Using for the first time

Heating up the drawer for the
first time
Heat the empty drawer for at least two
hours.
 Switch the drawer on by touching the
On/Off  sensor.
 Touch the  sensor repeatedly until
the  symbol lights up.
 Touch the  sensor repeatedly until
the segment on the far right-hand
side of the temperature display lights
up.
 Touch the  sensor repeatedly until
2h lights up.
 Close the drawer.
The drawer will switch itself off
automatically after two hours.
The drawer is fitted with a contact
switch, which ensures that the heating
element and fan in the appliance only
work when the drawer is closed.
The metal components have a
protective coating which may give off a
slight smell when the drawer is heated
up for the first time. The smell and any
vapours will dissipate after a short time,
and do not indicate a faulty connection
or appliance. Ensure that the kitchen is
well ventilated.
17