Mitsubishi Electric FR-A700 Installation Manualline page 11

WIRING
3.3 Connection of provided brake resistor (FR-A760 only)
Connecting the brake resistor enclosed with the unit to the FR-A760-00017 to 00061 will improve regeneration
capability.
(1) Installation procedure
Connect the brake resistor to the inverter with provided screws.
REMARKS
Connecting the brake resistor changes the protective structure to OPEN type (NEMA1).
(2) Connection
Wiring cover and Handling (FR-A760-00061 or less)
1) Remove the wiring cover of the inverter. Punch out a knockout by firmly tapping it with such as a hammer. Remove
any sharp edges and burrs from knockout holes of the wiring cover.
Wiring cover
8