Table - Badger Meter Dynasonics DXN User Manual

Time Range
The Time Range control selects a period to be shown on the X axis . See
control, a drop-down menu appears . Highlight a parameter with the blue box and press Set to load the parameter . Press X to
exit the drop-down menu .
Delete Graph Data
To clear any current graphing data and return the graph scaling to factory defaults, first press Unlock Graph Data Clear . A
green checkmark appears and the Delete Graph Data button turns red .
Press Delete Graph Data . The graph resets to factory defaults and the Delete Graph Data button turns gray .
Table Page
The Table page shows all the current values the meter is tracking along with their respective units . The scroll bar on the right
side of the page is used to scroll up or down the list until the required parameter is found .
November 2016
10 Seconds 30 Minutes
30 Seconds 1 Hour
1 Minute 5 Hours
10 Minutes 10 Hours
Table 7: Time Axis Choices
Figure 43: Delete graph data
Figure 44: Main > Table
HYB-UM-00090-EN-04

Table 7

for the time choices . When you press the
1 Day 14 Days
5 Days 1 Month
7 Days 6 Months
10 Days 1 Year
Main Group
Page 35