Bosch 8733951033 Installation & Operation Manual page 8

8 | Bosch ZS Series Zone Sensors R1
Sensor
ZS Push
Table 7
Sensor
ZS Manager
Table 8
Data subject to change
Features

LCD Display

button to override the schedule and put the zone in an occupied state, or force the zone to an
unoccupied state

and buttons to change any editable property, such as the temperature or humidity set-point.

button to cycle through information defined in the control program (see Table 11 for more info)

Green LED to indicate occupied state

Local access port

Available in:
—
Temperature only: ZSP-1 (8733951036)
—
Temperature with Humidity: ZSP-1H (8733951037)
—
Temperature with Humidity and CO2 : ZSP-1HC (8733951038)
Features

LCD Display

button to override the schedule and put the zone in an occupied state, or force the zone to an
unoccupied state

and buttons to change any editable property, such as the temperature or humidity set-point.

button to cycle through information defined in the control program (see Table 11 for more info)

Green LED to indicate occupied state

Local access port

button to select different system modes (Heat/Cool/Auto/Off).

button to select between two modes of fan operation (Auto/On).

Available in:
—
Temperature only: ZSM-1 (8733951039)
—
Temperature with Humidity: ZSM-1H (8733951040)
—
Temperature with Humidity and CO2 : ZSM-1HC (8733951041)
Installation & OperationManual
02.2018 | Bosch Thermotechnology Corp.