Election Chart - Huck 2502 Instruction Manual

2502 & A2502 Series Hydraulic Installation Tools (
There are a large variety of nose assemblies available
for Huck Installation Tools. Each nose assembly installs
a specifi c type and size of fastener.
The chart below is an overview of some of the types
of fasteners that are available from Huck. It is not all-
inclusive, nor does it imply that the tool covered by this
manual will install all of these types of fasteners.
TABLE 3 - FASTENER SELECTION CHART
HUCKBOLTS
®
• C6L HUCKBOLT
• HP8 HUCKBOLT ® (1)
® (1)
• C5OL HUCKBOLT
® (1)
• GPL LOCKBOLT
• MAGNA-GRIP ® HUCKBOLT
• NAS SHEAR HUCKBOLT
• NAS TENSION HUCK BOLT
BLIND BOLTS
®
• UNIMATIC BLIND BOLT
» MS2114OU & MS2114OS
» MS21141U & MS21141S
» MS90353U & MS90353S
• DOUBLE ACTION BLIND BOLT
» MS90353 & MS90354
» MS21141U & MS21141S
HK837
F S
ASTENER ELECTION
®
®
)
C
HART
• Refer to the appropriate Nose Assembly Selection
Chart for information about fastener sizes installed
and required clearance dimensions.
• Refer to the various Huck Fastener Selection Charts
for more specifi c information on fastener type and
sizing.
BLIND RIVETS
• 9SP & MS BLIND RIVET
®
• MAGNA-LOK BLIND RIVET
• RAK BLIND RIVET
• MAGNA-BULB™ BLIND RIVET
• OSR BLIND RIVET
• UNIMATIC ® BLIND RIVET
» NAS 1919U & NAS 1919S
» NAS 1921U & NAS 1921S
» MS90354U & MS90354S
• DOUBLE ACTION BLIND RIVET
» NAS191D & NAS1921
• OVERSIZE BLIND RIVET
» OSMLSP & OSMLS100
HUCK-FIT
• HUCK-FIT™ FASTENER
LOCKBOLT
• LGPL LOCKBOLT
ASP
• Asp ® FASTENER
(1) These fasteners are available in inch & metric sizes.
30
Alcoa Fastening Systems & Rings
®
(1)
(1)
® (1)