Advertisement
7
(3) Download and install [driver of the MCU board] from the following site.
・Virtual COM Port Driver (FTDI)
download site
http://www.ftdichip.com/Drivers/VCP.htm
→ Please choose an appropriate driver from the item of VCP Drivers.
① Connect MCU Board to PC by USB
② Open the Device Manager
③ Install driver for FT232
④ Install driver for USB serial port
Setup procedure(2)
Right-click the
mouse on the
"computer"
Select
"Properties"
Right-click the mouse on
Select
the "FT232R USB UART"
"Update Driver Software"
Right-click the mouse
on the "USB Serial Port"
Select
"Update Driver Software"
Select "Device Manager"
Select
"Browse my computer for driver software"
Set the downloaded driver in the input box of
[Search for driver software in this location],
and Install the driver
Advertisement
