Advertisement
11
Step4. NFC TAG initial setting
The initial configuration of the NFC TAG board (antenna board)
■MN63Y1210A
Serial Type
: UART / Clock synchronous serial
(1) Board setting
Serial-IF select switch
MN63Y1210
Setup procedure(6)
UART
Clock synchronous serial
(2) Writing initialization data (Serial Type setting)
Initialize the TAG by using the application of TAG setting.
(
Panasonic_TagSetting1210
(1) Start Android application.
(2) Push the button of hope.
(3) Bring the mobile phone close to the TAG to write
UART
Clock synchronous serial
)
initial data.
Advertisement
