Huawei E182E HSPA+ Quick Start Up Manual

Usb slider

Hide thumbs Also See for E182E HSPA+:

Table of Contents

Download this manual

HUAWEI E182E HSPA+ USB

Thank you for choosing this USB Slider. With the

USB Slider, you can access the Internet through

wireless network at a high speed.

Note:

This manual describes the appearance, installation and removal of the USB Slider.

For the operation of the management program, refer to the User Manual.

Getting to Know Your USB Slider

The following figure shows the appearance of the USB Slider. It is only for your

reference. The actual product may differ.

It connects the USB Slider to a computer.

It reveals the USB connector

It indicates the status of the USB Slider.

Green, blinking (on for 100ms and off for 100ms; then on for 100ms and off for

2700ms), the USB Slider is powered on.

Green, blinking (on for 100ms and off for 2900ms), the USB Slider is registered

to a GSM/GPRS/EDGE network.

Blue, blinking (on for 100ms and off for 2900ms), the USB Slider is registered

to a UMTS network.

Slider

Quick Start

Table of Contents

Do you have a question about the E182E HSPA+ and is the answer not in the manual?

Page 1: Quick Start
HUAWEI E182E HSPA+ USB Slider Quick Start Thank you for choosing this USB Slider. With the USB Slider, you can access the Internet through wireless network at a high speed. Note: This manual describes the appearance, installation and removal of the USB Slider.
Page 2 Green, on, the USB Slider is connected to a GPRS/EDGE network. Blue, on, the USB Slider is connected to a WCDMA network. Cyan, on, the USB Slider is conn ected to a HSPA+ network. O , the USB Slider is removed. SIM/USIM Card Slot It is...
Page 3 Starting the Management Program After the USB Slider is installed, the management program is launched automatically. Then every time the USB Slider is connected to the PC, the management program is launched au tomatically. You can also double-click the shortcut icon on the desktop to launch the management program.