Manual Reset - ROL ERGO Series EE - ECS+ Manual

14
4.2

Manual Reset

If a motor or other electronic has been disconnected from the column, during or after the
assembly, a reset (homing) cycle MUST be performed. A reset cycle should be made with
an evenly distributed weight of approx. 45 kg (100 lbs) applied on the desk.
Perform a reset by:
ROL | ERGO Sweden
Simultaneously pressing the up and down buttons for minimum of
8 seconds.
Press and hold the down button and the desk will slowly move the
lowest point possible.
The desk/stand is ready for normal use.
W: www.rolergo.com P: +46 36 36 88 80