Panasonic KX-TDE100 Features Manual page 272

1.24 Voice Message Features
voice messages are being played, the line will remain connected until all voice messages finish playing.
This is because a reorder tone cannot be detected from an analogue line while playing voice messages.
• The first digit of the Walking COS feature number must be entered before the greeting message finishes
playing.
• Accessing the Message Box of Another Extension
Listening to voice messages left by callers using a Message button for another extension is available
only when voice messages have been left in the message box.
• It is not recommended to record music when creating a greeting message.
• This feature does not answer calls that are forwarded using the Call Forwarding by QSIG feature
(1.30.4.3 Call Forwarding (CF)—by QSIG).
Programming Manual References
PC Programming Manual
2.4.5 Tool—Simplified Voice Message—Delete All Recording
2.4.6 Tool—Simplified Voice Message—Check Current Usage
2.7.5 [1-1] Slot—IPCMPR SVM Property
2.8.5 [2-3] Timers & Counters—Miscellaneous
→ SVM—Recording Time
→ SVM—Dial Tone Continuous Time
2.8.9 [2-6-1] Numbering Plan—Main—Features—Simplified Voice Message Access
2.9.1 [3-1-1] Trunk Group—TRG Settings—Tone Detection
→ Simplified Voice Message Tone Detection—Silence
→ Simplified Voice Message Tone Detection—Continuous
→ Simplified Voice Message Tone Detection—Cyclic
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 6—Display Lock / SVM Lock
2.10.9 [4-1-7] Wired Extension—Simplified Voice Message
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 6—SVM Lock
2.10.16 [4-2-5] Portable Station—Simplified Voice Message
2.11.3 [5-3-1] Voice Message—DISA System
→ Recording Mode
→ Remote Access
2.11.5 [5-3-3] Voice Message—SVM
PT Programming Manual
None
Feature Guide References
1.9.5 Walking COS
1.29.1 Dial Tone
3.1 Capacity of System Resources
User Manual References
1.6.2 Using Voice Messaging (Built-in Simplified Voice Message [SVM])
3.1.2 Settings on the Programming Mode
272 Feature Guide