Panasonic KX-TDE100 Features Manual page 154

1.10 Automatic Route Selection (ARS) Features
[Programming Procedures]
1.
ARS Mode
It is possible to select whether ARS operates when an extension user makes a call using any Idle Line
Access method or when an extension user makes a call using any Trunk Access method. (→ 1.5.5.3
Trunk Access)
→ 2.14.1 [8-1] System Settings—ARS Mode
→ [320] ARS Mode
2.
Leading Number Exception Table
Store the telephone numbers that will avoid using the ARS feature.
→ 2.14.7 [8-6] Leading Number Exception
→ [325] ARS Exception Number
2
ARS Leading Number Exception Table
Location
No.
001
002
:
3.
Leading Number Table
Store the area codes and/or telephone numbers as leading number that will be routed by the ARS
feature. In this table, the Routing Plan (refer to "4. Routing Plan Table
each number.
The additional (remain) number of digits must be assigned only when "#", for example, is needed after
a dialled number. The "#" is added after the assigned number of digits of dialled number (excluding a
leading number).
→ 2.14.2 [8-2] Leading Number—Leading Number
→ [321] ARS Leading Number
→ 2.14.2 [8-2] Leading Number—Additional Number of Digits
→ 2.14.2 [8-2] Leading Number—Routing Plan Number
→ [322] ARS Routing Plan Table Number
3
ARS Leading Number Table
Location
No.
0001
0002
0003
:
If a dialled number matches a leading number, the number will be modified according to the
corresponding Routing Plan Table and the modified number will be sent to the trunk when the assigned
additional (remain) number of digits are dialled.
If a dialled number matches multiple leading number entries, the leading number entry with the lowest
numbered location will have priority.
154 Feature Guide
1 Assignment
Leading No.
Exception
033555
06456
:
3 Assignment
Leading Additional (Remain)
No. No. of Digits
039 7
03 0
0444 5
: :
Assignment
2
Routing Plan
Table No.
1
4
5
:
Assignment") is selected for
4