Winegard Carryout G2+ Instruction Manual

Winegard Carryout G2+ Instruction Manual

Advertisement

Instruction Manual
SD
SD/HD
SD/HD
Do not return antenna to place of purchase
Power Inserter
see page 2 for setup instructions
2452360

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Carryout G2+ and is the answer not in the manual?

Questions and answers

Summary of Contents for Winegard Carryout G2+

  • Page 1 Instruction Manual SD/HD SD/HD Do not return antenna to place of purchase Power Inserter see page 2 for setup instructions 2452360...
  • Page 2: Specifications

    Carryout G2 + antenna is not compatible with DIreCtV swM-only receivers (e.g. H25 or Hr34). If you have a swM- only technology receiver, winegard Model swM-840 kit is available. this swM kit will allow for proper swM technology operation with winegard mobile satellite tV antennas.
  • Page 3: Switch Settings

    Power Inserter. Locate the handle in the box. with “wIneGArD” on the Give the Carryout G2 + antenna approximately 3-5 minutes handle facing upwards, align the two holes in the handle to complete the search sequence.
  • Page 4: Receiver Setup

    receiver setup select 3-LNB (18”x 20”) or 3 Satellites. If given the option of swM or Multiswitch, select Multiswitch. Connect the receiver to a power source, and complete receiver setup. receiver setup for the primary receiver follows; if your receiver differs from the options shown, you may need to consult your receiver manual.
  • Page 5 DIsH receiver setup select Check Switch. If using two DIsH receivers with the Carryout G2 + antenna, both receivers must be configured off of the primary port by following the steps below. Disconnect coax cable from the satellite In port on the back of the receiver.
  • Page 6: Troubleshooting

    Changes or modifications not expressly approved installation. this equipment generates, uses and can radiate radio by winegard could void your authority to operate frequency energy and, if not installed and used in accordance the equipment.
  • Page 7: Optional Accessories

    Mount Kit to fix this is to disconnect the cable from that device, use a...
  • Page 8 Customer must provide proof of purchase to verify the product is under warranty. If the product is brought to an authorized winegard dealer for service prior to expiration of year one (1) of the warranty period and a defect in material or workmanship is verified by winegard technical services, winegard Company will cover the winegard dealer’s labor charges for...

Table of Contents