Installing The Connector Board - Sony DCU-8000 Installation Manual

5. While closing the eject levers in the direction of arrow
1, push in the plug-in board.
1 1
Eject levers
Plug-in board
6. Attach the plug-in board loose-proof assembly and the
front panel by reversing the installation steps of 2, 3.
DCU-8000 IM

1-4-2. Installing the Connector Board

Installation
1. Remove the screw or the two installing screws from
the slot into which the connector board is going to be
installed. Then remove the blank panel or the
connector board.
B3 x 5
Blank panel
n
Store the removed blank panel in a safe place.
2. Insert the connector board horizontally level and
secure it with the two fixing screws.
Fixing screw
Connector board
Name of option Name of board Slot on the rear side
MKS-8701 CN-2195
MKS-8702 CN-2194
1-4. Installing the Options
Fixing screw
Install the board into the
slot in the rear that
corresponds to the RC-90
board that is inserted in
the slot in the front.
Install the board into the
slot in the rear that
corresponds to the IF-848
board that is inserted in
the slot in the front.
1-5