Download Print this page

Toyota C-HR 2018 Owner's Manual

Toyota C-HR 2018 Owner's Manual

Hide thumbs Also See for C-HR 2018:

Quick reference manual (48 pages)

Table Of Contents

Table of Contents

Advertisement

Quick Links

Download this manual See also: Quick Reference Manual

Pictorial index

For safety

1

and security

Instrument

2

cluster

Operation of

3

each

component

4

Driving

5

Interior features

Maintenance

6

and care

When trouble

7

arises

Vehicle

8

specifications

9

For owners

Index

C-HR_OM_USA_OM10526U

Search by illustration

Make sure to read through them

How to read the gauges and meters, the variety of

warning lights and indicators, etc.

Opening and closing the doors and windows,

adjustment before driving, etc.

Operations and advice which are necessary for

driving

Usage of the interior features, etc.

Caring for your vehicle and maintenance

procedures

What to do in case of malfunction or emergency

Vehicle specifications, customizable features, etc.

Reporting safety defects for U.S. owners, and seat

belt and SRS airbag instructions for Canadian

owners

Search by symptom

Search alphabetically

Table of Contents

Advertisement

Table of Contents

Need help?

Need help?

Do you have a question about the C-HR 2018 and is the answer not in the manual?

Questions and answers

Summary of Contents for Toyota C-HR 2018

Page 1 Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of warning lights and indicators, etc. cluster Operation of Opening and closing the doors and windows, each adjustment before driving, etc.
Page 2: Table Of Contents
TABLE OF CONTENTS For your information....... 6 Operation of each Reading this manual ....10 component How to search......11 Pictorial index ......12 3-1. Key information Keys........98 For safety and security 3-2. Opening, closing and locking the doors Side doors ......
Page 3 Opening the fuel tank cap........200 4-5. Using the driving 4-1. Before driving support systems Driving the vehicle..... 146 Toyota Safety Sense P..204 Cargo and luggage.... 156 PCS (Pre-Collision Vehicle load limits ..... 159 System) ......211 Trailer towing..... 160 LDA (Lane Departure Dinghy towing....
Page 4 TABLE OF CONTENTS Interior features Maintenance and care 5-1. Using the air conditioning 6-1. Maintenance and care system and defogger Cleaning and protecting Air conditioning system ..290 the vehicle exterior ..320 Seat heaters...... 298 Cleaning and protecting the vehicle interior ... 324 5-2.
Page 5 When trouble arises Vehicle specifications 8-1. Specifications 7-1. Essential information Emergency flashers ..396 Maintenance data (fuel, oil level, etc.) ..450 If your vehicle has to be stopped in Fuel information....458 an emergency ....397 Tire information....461 7-2.
Page 6: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 7 SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of a mobile two-way radio system. Vehicle data recordings Your Toyota is equipped with several sophisticated computers that will record certain data, such as: •...
Page 8 EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •...
Page 9 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 10: Reading This Manual
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. Indicates operating or working procedures. Follow the steps 1 2 3 in numerical order.
Page 11: How To Search
How to search ■ Searching by name • Alphabetical index ..P. 502 ■ Searching installation position • Pictorial index....P. 12 ■ Searching by symptom or sound • What to do if... (Troubleshooting) ..P. 498 ■ Searching by title • Table of contents .....P. 2 C-HR_OM_USA_OM10526U...
Page 12: Pictorial Index
Pictorial index Pictorial index ■ Exterior Doors ......... . . P. 105 Locking/unlocking .
Page 13 Pictorial index Windshield wipers ....... . . P. 195 Precautions for winter ....... P. 285 Fuel filler door .
Page 14 Pictorial index ■ Instrument panel Engine switch....... . . P. 162, 165 Starting the engine/changing the positions .
Page 15 Pictorial index Multi-information display ......P. 89 If a warning messages or indicator is displayed ... P. 418 Turn signal lever .
Page 16 Pictorial index ■ Switches Automatic High Beam switch ......P. 190 Fuel filler door opener ......P. 202 Instrument panel light control dial .
Page 17 Pictorial index Meter control switches ......P. 90 Vehicle-to-vehicle distance switch....P. 236 LDA (Lane Departure Alert with steering control) switch .
Page 18 Pictorial index ■ Interior SRS airbags ........P. 32 Floor mats .
Page 19 Pictorial index Interior lights/personal lights ....P. 301, 302 Vanity lights ........P. 313 Assist grips .
Page 20 Pictorial index C-HR_OM_USA_OM10526U...
Page 21: For Safety And Security
For safety and security 1-1. For safe use Before driving...... 22 For safety drive ....24 Seat belts ......26 SRS airbags......32 Front passenger occupant classification system ..46 Exhaust gas precautions..53 1-2. Child safety Riding with children..... 54 Child restraint systems..
Page 22: 1-1. For Safe Use
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 23 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
Page 24: For Safety Drive
1-1. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 25 1-1. For safe use Adjusting the mirrors Make sure that you can see the rear of the vehicle clearly by adjusting the inside and outside rear view mirrors properly. (→P. 135, 137) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ●...
Page 26: Seat Belts
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 27 1-1. For safe use Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
Page 28 ■ Seat belt extender If your seat belts cannot be fastened securely because they are not long enough, personalized seat belt extender is available from your Toyota dealer free of charge. C-HR_OM_USA_OM10526U...
Page 29 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 30 ● Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 31 1-1. For safe use WARNING ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
Page 32: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. C-HR_OM_USA_OM10526U...
Page 33 1-1. For safe use ◆ SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front passen- ger from impact with interior components SRS driver’s knee airbag Can help provide driver protection SRS front passenger’s seat cushion airbag Can help restrain the front passenger ◆...
Page 34 1-1. For safe use SRS airbag system components Front impact sensors Driver’s seat position sensor Front passenger airbag Driver airbag “AIR BAG ON” and “AIR BAG Driver’s knee airbag OFF” indicator lights SRS warning light Side impact sensors (front) Airbag sensor assembly Side impact sensors (front Seat belt pretensioners and doors)
Page 35 1-1. For safe use Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on infor- mation obtained from the sensors etc. shown in the system compo- nents diagram above.
Page 36 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 37 1-1. For safe use WARNING ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 38 1-1. For safe use WARNING ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad and lower portion of the instrument panel. These items can become projectiles when the SRS driver, front passenger and driver’s knee airbag deploy.
Page 39 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillars garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ● Do not place anything, such as a cushion, on the front passenger's seat.
Page 40 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 41 1-1. For safe use ■ If the SRS airbags deploy (inflate) ● Slight abrasions, burns, bruising, etc., may be sustained from SRS airbags, due to the extremely high speed deployment (inflation) by hot gases. ● A loud noise and white powder will be emitted. ●...
Page 42 1-1. For safe use ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags and SRS curtain shield airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
Page 43 1-1. For safe use ■ Types of collisions that may not deploy the SRS airbags (SRS side and curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
Page 44 1-1. For safe use ■ When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●...
Page 45 1-1. For safe use ● The front passenger’s seat cushion sur- face is scratched, cracked, or otherwise damaged. ● The surface of the seats with the side airbag is scratched, cracked, or other- wise damaged. ● The portion of the front pillars, rear pil- lars or roof side rail garnishes (padding) containing the curtain shield airbags inside is scratched, cracked, or other-...
Page 46: Front Passenger Occupant Classification System
1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. SRS warning light Seat belt reminder light “AIR BAG ON”...
Page 47 1-1. For safe use Condition and operation in the front passenger occupant classi- fication system ■ Adult “AIR BAG ON” and “AIR BAG OFF” “AIR BAG ON” indicator lights Indicator/ SRS warning light warning light Seat belt reminder light flashing Front passenger airbag Side airbag Activated...
Page 48 1-1. For safe use ■ Child “AIR BAG OFF” “AIR BAG ON” and “AIR BAG OFF” or “AIR BAG indicator lights ON” Indicator/ warning light SRS warning light Seat belt reminder light flashing Deactivated or Front passenger airbag activated Side airbag on the front passenger seat Activated Curtain shield airbag...
Page 49 1-1. For safe use ■ Child restraint system with infant “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights OFF” Indicator/ SRS warning light warning light Seat belt reminder light flashing Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag Devices...
Page 50 1-1. For safe use ■ There is a malfunction in the system “AIR BAG ON” and “AIR BAG OFF” “AIR BAG OFF” indicator lights Indicator/ SRS warning light warning light Seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag...
Page 51 1-1. For safe use WARNING ■ Front passenger occupant classification system precautions Observe the following precautions regarding the front passenger occupant classification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger’s seat belt plate has not been left inserted into the buckle before someone sits in the front passenger seat.
Page 52 SRS warning light may come on to indicate a malfunction of the front passenger occupant classification system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 53: Exhaust Gas Precautions
Keep the back door closed. ● If you smell exhaust gases in the vehicle even when the back door is closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible. ■ When parking ●...
Page 54: 1-2. Child Safety
1-2. Child safety Riding with children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. ● It is recommended that children sit in the rear seats to avoid acci- dental contact with the shift lever, wiper switch, etc.
Page 55: Child Restraint Systems
1-2. Child safety Child restraint systems Before installing a child restraint system in the vehicle, there are precautions that need to be observed, different types of child restraint systems, as well as installation methods, etc., written in this manual. ● Use a child restraint system when riding with a small child that cannot properly use a seat belt.
Page 56 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the weight and size of the child, installed on the rear seat. Accord- ing to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 57 1-2. Child safety Child restraint system ■ Types of child restraint system installation methods Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt P. 61 attachment Child restraint...
Page 58 1-2. Child safety When using a child restraint system ■ When installing a child restraint system to a front passenger seat For the safety of a child, install a child restraint system to a rear seat. When installing child restraint system to a front passenger seat is unavoidable, adjust the seat as follows and install the child restraint system.
Page 59 1-2. Child safety WARNING ■ When using a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Never install a rear-facing child restraint system on the front passenger seat even if the “AIR BAG OFF” indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child if the rear-facing child restraint system is installed on the front passenger seat.
Page 60 1-2. Child safety WARNING ■ When using a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder.
Page 61 1-2. Child safety Child restraint system fixed with a seat belt A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. ◆ Installing child restraint system using a seat belt (child restraint lock function belt) Install the child restraint system in accordance to the operation manual enclosed with the child restraint system.
Page 62 1-2. Child safety While pushing child restraint system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 63 1-2. Child safety Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. Fully extend the shoulder belt and allow it to retract to put it in lock mode.
Page 64 1-2. Child safety ■ Booster seat If installing the child restraint system to the front passenger seat is unavoidable, refer to P. 58 for front passenger seat adjustment. High back type: If the head restraint interferes with your child restraint system, and the head restraint can be removed, remove the head restraint.
Page 65 1-2. Child safety ◆ Removing a child restraint system installed with a seat belt Press the buckle release button and fully retract the seat belt. When releasing the buckle, the child restraint system spring up due to the rebound of the seat cushion.
Page 66 1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious inju- ries that could result in death.
Page 67 1-2. Child safety Child restraint system fixed with a child restraint LATCH anchor ■ Child restraint LATCH anchors LATCH anchors are provided for the rear outboard seats. (Buttons displaying the location of the anchors are attached to the seats.) ■ When installing in the rear outboard seats Install the child restraint system in accordance to the operation manual enclosed with the child restraint system.
Page 68 1-2. Child safety With flexible lower attachments  Latch the hooks of the lower straps onto LATCH anchors. For owners in Canada: symbol child restraint system indicates the presence of a lower connec- tor system. Canada only With rigid lower attachments ...
Page 69 1-2. Child safety If the child restraint has a top tether strap, follow the child restraint manufacturer’s operation manual regarding the installa- tion, using the top tether strap to latch onto the top tether strap anchor. (→P. 70) After installing the child restraint system, rock it back and forth to ensure that it is installed securely.
Page 70 1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● When using the LATCH anchors, be sure that there are no foreign objects around the anchors and that the seat belt is not caught behind the child restraint system.
Page 71 1-2. Child safety ■ Fixing the top tether strap to the anchor bracket Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. Rear outboard seats  Remove the head restraint. (→P. 130) Latch the hook onto the Top tether strap anchor bracket and tighten...
Page 72 1-2. Child safety Rear center seat  Adjust the head restraint to the upmost position. If the head restraint interferes with your child restraint system, and the head restraint can be removed, remove head restraint. (→P. 130) Latch the hook onto the Top tether strap anchor bracket and tighten the top tether strap.
Page 73 1-2. Child safety ■ Laws and regulations pertaining to anchors The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to SAE J1819. WARNING ■...
Page 74: 1-3. Theft Deterrent System
1-3. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
Page 75 1-3. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ●...
Page 76: Theft Prevention Labels (U.s.a.)
1-3. Theft deterrent system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recov- ery of parts from stolen vehicles. Do not remove under the penalty of law. C-HR_OM_USA_OM10526U...
Page 77: Instrument Cluster
Instrument cluster Instrument cluster Warning lights and indicators ......78 Gauges and meters .... 86 Multi-information display ..89 C-HR_OM_USA_OM10526U...
Page 78: Instrument Cluster Warning Lights And Indicators
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.
Page 79 2. Instrument cluster Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems. Warning lights Pages Brake system warning light (red) (U.S.A.) P. 408 Brake system warning light (red) (Canada) P. 408 Malfunction indicator lamp (U.S.A.) P.
Page 80 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light comes on to indicate a malfunction.
Page 81 2. Instrument cluster Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Indicators Pages Turn signal indicator P. 176 Headlight indicator (U.S.A.) P. 185 Tail light indicator (Canada) P. 185 Headlight high beam indicator P.
Page 82 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : In order to confirm operation, the BSM outside rear view mirror indicators illuminate in the following situations: •...
Page 83 They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. C-HR_OM_USA_OM10526U...
Page 84 2. Instrument cluster Symbols on multi-information display Pages Charging system warning light P. 408 Low engine oil pressure warning light P. 408 High engine coolant temperature warning light P. 411 Smart key system (if equipped) P. 165 Brake Override System/Drive-Start Control P.
Page 85 Have the vehicle inspected by your Toyota dealer. C-HR_OM_USA_OM10526U...
Page 86: Gauges And Meters
2. Instrument cluster Gauges and meters The units used on the speedometer may differ depending on the tar- get region. Tachometer Displays the engine speed in revolutions per minute. Multi-information display Presents the driver with a variety of driving-related data. (→P. 89) Displays warning messages in case of a malfunction.
Page 87 Displays the remaining distance until the engine oil should be changed. If “-” is displayed before distance, it means oil maintenance is overdue. Have the engine oil changed by your Toyota dealer. • Displays the maintenance required information when the engine switch is turned to the “ON”...
Page 88 • When the outside temperature has changed suddenly (at the entrance/ exit of a garage, tunnel, etc.) ● If “− −” is displayed continuously, the system may be malfunctioning. Take your vehicle to your Toyota dealer. NOTICE ■ To prevent damage to the engine and its components ●...
Page 89: Multi-Information Display
2. Instrument cluster Multi-information display Display contents The multi-information display presents the driver with a variety of vehi- cle data. ● Menu icons Displays the following informa- tion when an icon is selected. (→P. 90) Some of the information may be displayed automatically depending on the situation.
Page 90 2. Instrument cluster Operating the meter control switches The multi-information display is operated using the meter control switches. Return to the previous screen Enter/set Select an item/change pages Drive information ● Current fuel consumption (zone display/numerical display) Displays the current rate of fuel consumption. ●...
Page 91 2. Instrument cluster ● Distance (driving range/after start) Displays the estimated maximum distance that can be driven with the quantity of fuel remaining and the distance driven after the engine was started, respectively • This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that dis- played.
Page 92 2. Instrument cluster Settings display The settings of the following items can be changed, refer to P. 474. For functions that can be enabled or disabled, the function switches between on and off each time is pressed. ● LDA (Lane Departure Alert) (→P. 226) Select to set up the following items.
Page 93 2. Instrument cluster ● Vehicle Settings Select the menu to set up the following item. • (Tire pressure warning system) setup (→P. 355) Select to initialize the tire pressure warning system. ● Meter settings Select the menu to set up the following items. •...
Page 94 2. Instrument cluster ■ Setting items ● “Meter Settings” and “Vehicle Settings” setting items are not selectable during driving and cannot be operated. Also, the settings screen is temporarily canceled in the following situations. • A warning message is displayed. •...
Page 95 2. Instrument cluster ■ G Monitor The following item is displayed. G-force display Displays the current G-force state. ■ Ending display When the engine switch is turned off, each of the following will be displayed on the multi-information display, and will extinguish after approximately 30 seconds.
Page 96 2. Instrument cluster WARNING ■ Caution for use while driving ● When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. ● Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc.
Page 97: Operation Of Each Component
Operation of each component 3-1. Key information Keys ........98 3-2. Opening, closing and locking the doors Side doors......105 Back door......112 Smart key system ..... 118 3-3. Adjusting the seats Front seats ......127 Rear seats......128 Head restraints....130 3-4.
Page 98: 3-1. Key Information
3-1. Key information Keys The keys The following keys are provided with the vehicle. Vehicles without a smart key system (type A)  Key (with a wireless remote control function) Operating the wireless remote con- trol function (→P. 99) Key (without a wireless remote control function) Key number plate Vehicles without a smart key system (type B)
Page 99 Pressing the button again within 3 seconds unlocks the other doors. Opens the windows P. 105 (→ : These settings must be customized at your Toyota dealer. Vehicles with a smart key system  Locks all the doors P. 105 (→...
Page 100 ■ If you lose your keys New genuine keys can be made by your Toyota dealer using the other key (vehicles without a smart key system) or mechanical key (vehicles with a smart key system) and the key number stamped on your key number plate.
Page 101 3-1. Key information ■ When riding in an aircraft When bringing a key with wireless remote control function onto an aircraft, make sure you do not press any buttons on the key while inside the aircraft cabin. If you are carrying the key in your bag, etc., ensure that the buttons are not likely to be pressed accidentally.
Page 102 The battery can be exchanged by the users. (→P. 373) However, as there may be damage to the key when exchanging, it is recommended to have the battery exchanged at your Toyota Dealer. ● To avoid serious deterioration, do not leave the electronic key within 3 ft.
Page 103 3-1. Key information ■ Certification for the wireless remote control For vehicles sold in the U.S.A.  FCC ID: MOZBG3AW This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence;...
Page 104 When an electronic key is lost (vehicles with a smart key system) If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that was provided with your vehicle.
Page 105: Side Doors
Unlocks the door Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Press and hold to open the windows : These settings must be customized at your Toyota dealer. C-HR_OM_USA_OM10526U...
Page 106 Pressing the button again within 3 seconds unlocks the other doors. Press and hold to open the windows : These settings must be customized at your Toyota dealer. ◆ Turning the key operates the doors as follows: Vehicles without a smart key system ...
Page 107 3-2. Opening, closing and locking the doors ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked using the wireless remote control. (Locked: once; Unlocked: twice) Windows: A buzzer sounds to indicate that the windows are operating. ■...
Page 108 3-2. Opening, closing and locking the doors ■ If the smart key system or wireless remote control does not operate properly Vehicles with a smart key system: Use the mechanical key to lock and unlock the doors. (→P. 436) Replace the battery with a new one if it is depleted. (→P. 373) Unlocking and locking the doors from the inside ◆...
Page 109 3-2. Opening, closing and locking the doors Locking the doors from the outside without a key Move the inside lock button to the lock position. Close the door. Vehicles without a smart key system  The door cannot be locked if the key is in the engine switch. Vehicles with a smart key system ...
Page 110 3-2. Opening, closing and locking the doors ■ Switching the door unlock function (vehicles with a smart key system) It is possible to set which doors the entry function unlocks using the wireless remote control. Turn the engine switch off. When the indicator light on the key surface is not on, press and hold approximately 5 seconds while pressing and holding The setting changes each time an operation is performed, as shown below.
Page 111 3-2. Opening, closing and locking the doors WARNING ■ To prevent an accident Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●...
Page 112: Back Door
3-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the fol- lowing procedures. Unlocking and locking the back door ◆ Entry function (vehicles with a smart key system) Press the button to unlock the back door.
Page 113 3-2. Opening, closing and locking the doors Opening the back door Raise the back door while pushing up the back door opener switch. The back door cannot be closed immediately after the back door opener switch is pushed. When closing the back door Lower the back door using the back door handle, and make sure to push the back door down from...
Page 114 3-2. Opening, closing and locking the doors ■ If the back door opener is inoperative The back door can be operated from the inside. Using a screwdriver, remove the cover. To protect the cover, place a rag between the flathead screwdriver and the cover as shown in the illustration.
Page 115 3-2. Opening, closing and locking the doors WARNING ■ Caution while driving ● Keep the back door closed while driving. If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 116 3-2. Opening, closing and locking the doors WARNING ■ Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ● Remove any heavy loads, such as snow and ice, from the back door before opening it.
Page 117 If a bicycle carrier or similar heavy object is attached to the back door, it may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended. NOTICE ■...
Page 118: Smart Key System
3-2. Opening, closing and locking the doors ∗ Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ● Unlocks and locks the doors (→P. 105) ●...
Page 119 ACCESSORY mode). ■ When “Smart Key System malfunction. See owner’s manual” is dis- played on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. C-HR_OM_USA_OM10526U...
Page 120 3-2. Opening, closing and locking the doors ■ Battery-saving function The battery-saving function will be activated in order to prevent the electronic key battery and the vehicle battery from being discharged while the vehicle is not in operation for a long time. ●...
Page 121 3-2. Opening, closing and locking the doors ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system, wireless remote control and engine immobi- lizer system from operating properly.
Page 122 3-2. Opening, closing and locking the doors ■ Note for the entry function ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
Page 123 3-2. Opening, closing and locking the doors ● Touching the door lock sensor while wearing gloves may delay or prevent lock operation. Remove the gloves and touch the lock sensor again. ● If the door handle becomes wet while the electronic key is within the effec- tive range, the door may lock and unlock repeatedly.
Page 124 3-2. Opening, closing and locking the doors ■ When the vehicle is not driven for extended periods ● To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the vehicle. ● The smart key system can be deactivated in advance. (→P. 474) ■...
Page 125 3-2. Opening, closing and locking the doors ■ Certification for the smart key system For vehicles sold in the U.S.A.  FCC ID: MOZBG3KW This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence;...
Page 126 (→P. 118) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves.
Page 127: Adjusting The Seats
3-3. Adjusting the seats Front seats Adjustment procedure Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever Lumbar support adjustment switch (if equipped) WARNING ■ When adjusting the seat position ● Take care when adjusting the seat position to ensure that other passen- gers are not injured by the moving seat.
Page 128: Rear Seats
3-3. Adjusting the seats Rear seats The seatbacks of the rear seats can be folded down. Before folding down the seatbacks Park the vehicle in a safe place. Apply the parking brake firmly and shift the shift lever to P. (→P. 171) Adjust the position of the front seat and the angle of the seatback.
Page 129 3-3. Adjusting the seats WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When folding the rear seatbacks down ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
Page 130: Head Restraints
3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Front seats Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. Lock release button Rear seats ■ Rear outboard seats To fold Pull the head restraint up while pressing the lock release button.
Page 131 3-3. Adjusting the seats ■ Removing the head restraints Front seats and rear center seat  Pull the head restraint up while pressing the lock release button. Lock release button Rear outside seats  Pull the head restraint up while pressing the both lock release buttons.
Page 132 3-3. Adjusting the seats ■ Adjusting the height of the front seat head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■ Adjusting the rear center seat head restraint Always raise the head restraint one level from the stowed position when using.
Page 133: Steering Wheel
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.
Page 134 3-4. Adjusting the steering wheel and mirrors ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. WARNING ■ Caution while driving Do not adjust the steering wheel while driving.
Page 135: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.
Page 136 3-4. Adjusting the steering wheel and mirrors ■ To prevent sensor error To ensure that the sensors operate prop- erly, do not touch or cover them. WARNING Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.
Page 137: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, operate the switch. Right Down Left C-HR_OM_USA_OM10526U...
Page 138 3-4. Adjusting the steering wheel and mirrors Folding and extending the mirrors Manual type  Push the mirror back in the direc- tion of the rear of the vehicle. Power type  Folds the mirrors Extends the mirrors Putting the outside rear view mirror folding switch in the neutral posi- tion sets the mirrors to automatic mode.
Page 139 3-4. Adjusting the steering wheel and mirrors ■ Mirror angle can be adjusted when Vehicles without a smart key system: The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system: The engine switch is in ACCESSORY or IGNITION ON mode. ■...
Page 140: Opening And Closing
3-5. Opening and closing the windows Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening : To stop the window partway, oper- ate the switch in the opposite direc- tion.
Page 141 3-5. Opening and closing the windows ■ The power windows can be operated when Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The engine switch is in IGNITION ON mode. ■...
Page 142 1 second or more. If you release the switch while the window is moving, start again from the beginning. If the window reverses and cannot be fully closed or opened, have the vehicle inspected by your Toyota dealer. C-HR_OM_USA_OM10526U...
Page 143 ● The power windows can be opened using the wireless remote control. (→P. 105) : These settings must be customized at your Toyota dealer. ■ Power window open reminder function The buzzer sounds and a message is shown on the multi-information display in the instrument cluster when the engine switch is turned off and the driver’s...
Page 144 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Closing the windows ● When using the wireless remote control, key or mechanical key (→P. 98) and operating the power windows, operate the power window after check- ing to make sure that there is no possibility of any passenger having any of their body parts caught in the side window.
Page 145: Driving
........200 Cargo and luggage ... 156 Vehicle load limits ..... 159 4-5. Using the driving support systems Trailer towing..... 160 Toyota Safety Sense P ..204 Dinghy towing ....161 PCS (Pre-Collision 4-2. Driving procedures System)......211 Engine (ignition) switch...
Page 146: 4-1. Before Driving
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine →P. 162, 165 Driving With the brake pedal depressed, shift the shift lever to D. (→P. 171) Release the parking brake. (→P. 178) If the parking brake is in automatic mode, the parking brake is released automatically when shifting the shift lever to any position other than P.
Page 147 4-1. Before driving Parking the vehicle With the shift lever in D, depress the brake pedal. Set the parking brake (→P. 178), and shift the shift lever to P. (→P. 171) If the parking brake is in automatic mode, the parking brake is set automat- ically when shifting the shift lever to P.
Page 148 4-1. Before driving ■ When starting off on an uphill The hill-start assist control will activate. (→P. 279) ■ Driving in the rain ● Drive carefully when it is raining, because visibility will be reduced, the win- dows may become fogged-up, and the road will be slippery. ●...
Page 149 4-1. Before driving ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is recom- mended: ● For the first 186 miles (300 km): Avoid sudden stops. ● For the first 621 miles (1000 km): •...
Page 150 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the location of the brake and accel- erator pedals to avoid depressing the wrong pedal.
Page 151 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving on slippery road surfaces ● Sudden braking, acceleration and steering may cause tire slippage and reduce your ability to control the vehicle. ●...
Page 152 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 153 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked ● Do not leave cigarette lighters in the vehicle. If a cigarette lighter is in a place such as the glove box or on the floor, it may be lit accidentally when luggage is loaded or the seat is adjusted, causing a fire.
Page 154 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When braking ● When the brakes are wet, drive more cautiously. Braking distance increases when the brakes are wet, and this may cause one side of the vehicle to brake differently than the other side.
Page 155 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●...
Page 156: Cargo And Luggage
Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (→P. 159) Toyota does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing. C-HR_OM_USA_OM10526U...
Page 157 4-1. Before driving Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (→P. 450) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb.
Page 158 4-1. Before driving WARNING ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment: Receptacles containing gasoline ● ● Aerosol cans ■ Storage precautions Observe the following precautions. Failure to do so may prevent the pedals from being depressed properly, may block the driver’s vision, or may result in items hitting the driver or passengers, possibly causing an accident.
Page 159: Vehicle Load Limits
Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. ◆ Towing capacity Toyota does not recommend towing a trailer with your vehicle. ◆ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
Page 160: Trailer Towing
Trailer towing Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicy- cle, etc. Your vehicle is not designed for trailer towing or for the use of tow hitch mounted carriers.
Page 161: Dinghy Towing
4-1. Before driving Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with all four wheels on the ground. C-HR_OM_USA_OM10526U...
Page 162: Driving Procedures Engine (Ignition) Switch
4-2. Driving procedures Engine (ignition) switch (vehicles without a smart key system) Starting the engine Check that the parking brake is set. Check that the shift lever is in P. Firmly depress the brake pedal. Turn the engine switch to the “START” position to start the engine. Changing the engine switch positions “LOCK”...
Page 163 “LOCK” position. ■ If the engine does not start The engine immobilizer system may not have been deactivated. (→P. 74) Contact your Toyota dealer. ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 164 Do not crank the engine for more than 30 seconds at a time. This may overheat the starter and wiring system. ● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. C-HR_OM_USA_OM10526U...
Page 165: Engine (Ignition) Switch (Vehicles With A Smart Key System)
4-2. Driving procedures Engine (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Check that the parking brake is set. Check that the shift lever is in P.
Page 166 4-2. Driving procedures Stopping the engine Stop the vehicle. Set the parking brake (→P. 178), and shift the shift lever to P. If the parking brake is in automatic mode, the parking brake is set automat- ically when shifting the shift lever to P. (→P. 177) Press the engine switch.
Page 167 If the engine does not start ● The engine immobilizer system may not have been deactivated. (→P. 74) Contact your Toyota dealer. ● Check that the shift lever is securely set in P. The engine may not start if the shift lever is displaced out of P.
Page 168 When the “Entry & Start System Malfunction. See Owner’s Manual.” is displayed on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ If the electronic key battery is depleted →P. 373 ■...
Page 169 4-2. Driving procedures WARNING ■ When starting the engine Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■...
Page 170 Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
Page 171: Continuously Variable Transmission
4-2. Driving procedures Continuously variable transmission Shifting the shift lever Vehicles without a smart key system: While the engine switch is in the “ON” position, depress the brake pedal and while pressing the button move the shift lever. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
Page 172 4-2. Driving procedures Shift position purpose Shift position Objective or function Parking the vehicle/starting the engine Reversing Neutral Normal driving 7-speed sport sequential shiftmatic mode driving (→P. 172) : To improve fuel efficiency and reduce noises, set the shift lever in D for normal driving.
Page 173 M This may indicate a malfunction in the continuously variable transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the transmission will operate in the same manner as when the shift lever is in D.)
Page 174 If the shift lever cannot be shifted with your foot on the brake pedal while pressing the button on the shift knob, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 175 4-2. Driving procedures WARNING ■ When driving on slippery road surfaces Be careful of downshifting and sudden acceleration, as this could result in the vehicle skidding to the side or spinning. ■ To prevent an accident when releasing the shift lock Before pressing the shift lock override button, make sure to set the parking brake and depress the brake pedal.
Page 176: Turn Signal Lever
4-2. Driving procedures Turn signal lever Operating instructions Right turn Lane change to the right (move the lever partway and release The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release The left hand signals will flash 3 times.
Page 177: Parking Brake
4-2. Driving procedures Parking brake A selections can be made as desired from the following modes. Automatic mode The parking brake is set or released automatically according to shift lever operation. Even when in automatic mode, the parking brake can be set and released manually.
Page 178 4-2. Driving procedures Manual mode The parking brake can be set and released manually. Pull the parking brake switch to set the parking brake (U.S.A.) The parking brake indicator light and parking brake lamp will turn (Canada) Pull and hold the parking brake switch if an emergency occurs and it is necessary to operate the park- ing brake while driving.
Page 179 Operate the parking brake switch. If the message does not disappear after operating the switch several times, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ Parking brake operation sound When the parking brake operates, a motor sound (whirring sound) may be heard.
Page 180 4-2. Driving procedures ■ Parking brake indicator light and parking brake lamp ● Depending on the engine switch position/mode, the parking brake indicator light and parking brake lamp will turn on and stay on as described below: Vehicles without a smart key system ...
Page 181 When the parking brake cannot be released due to a malfunction Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear. Have the vehicle inspected by your Toyota dealer immediately if this occurs. C-HR_OM_USA_OM10526U...
Page 182: Brake Hold
4-2. Driving procedures Brake Hold The brake hold system keeps the brake applied when the shift lever in any position other than P or R with the system on and the brake pedal has been depressed to stop the vehicle. The system releases the brake when the accelerator pedal is depressed with the shift lever in any position other than P or N to allow smooth start off.
Page 183 If “Brake Hold Fault Depress Brake to Deactivate Visit Your Dealer” is displayed on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. ■ Warning messages and buzzers Warning messages and buzzers are used to indicate a system malfunction or to inform the driver of the need for caution.
Page 184 4-2. Driving procedures WARNING ■ When the vehicle is on a steep incline When using the brake hold system on a steep incline exercise caution. The brake hold function may not hold the vehicle in such a situation. ■ When stopped on a slippery road The system cannot stop the vehicle when the gripping ability of the tires has been exceeded.
Page 185: Operating The Lights And
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Turning the end of the lever turns on the lights as follows: For U.S.A.  headlights, side marker, parking lights, daytime running lights (→P.
Page 186 4-3. Operating the lights and wipers For Canada  headlights, side marker, parking lights, daytime running lights (→P. 187) and so on turn on and off auto- matically. (When engine switch is in the “ON” position [vehicles with- out a smart key system] or IGNITION ON mode [vehicles with a smart key system])
Page 187 4-3. Operating the lights and wipers ■ Daytime running light system ● To make your vehicle more visible to other drivers during daytime driving, the daytime running lights turn on automatically whenever the engine is started and the parking brake is released with the headlight switch in the position.
Page 188 4-3. Operating the lights and wipers Vehicles with a smart key system  ● When the headlights come on: The headlights and tail lights turn off 30 sec- onds after a door is opened and closed if the engine switch is turned to ACCESSORY mode or turned off.
Page 189 4-3. Operating the lights and wipers ■ Customization Settings (e.g. light sensor sensitivity) can be changed. (Customizable features: →P. 474) NOTICE ■ To prevent battery discharge Do not leave the lights on longer than necessary when the engine is not running.
Page 190: Automatic High Beam
4-3. Operating the lights and wipers Automatic High Beam The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of vehicles ahead etc., and automatically turns the high beam on or off as necessary.
Page 191 4-3. Operating the lights and wipers Turning the high beam on/off manually ■ Switching to low beam Pull the lever to the original position. The Automatic High Beam indi- cator will turn off. Push the lever away from you to activate the Automatic High...
Page 192 4-3. Operating the lights and wipers ■ High beam automatic turning on or off conditions ● When all of the following conditions are fulfilled, the high beam will be auto- matically turned on (after approximately 1 second): • Vehicle speed is above approximately 21 mph (34 km/h). •...
Page 193 4-3. Operating the lights and wipers ● The high beam may be turned on or off when the driver does not expect it. ● Bicycles or similar objects may not be detected. ● In the situations shown below, the system may not be able to accurately detect surrounding brightness levels.
Page 194 3 times. Automatic High Beam (headlights) may turn on even the vehicle is stopped. ■ If “Headlight System Malfunction. Visit Your Dealer.” is displayed on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer.
Page 195: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever The wiper operation is selected by moving the lever as follows. For U.S.A.  Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation For Canada...
Page 196 4-3. Operating the lights and wipers Wiper intervals can be adjusted when intermittent operation is selected. Increases the intermittent wind- shield wiper frequency Decreases intermittent windshield wiper frequency Washer/wiper dual operation Wipers will automatically operate a couple of times after the washer squirts.
Page 197 Damage to the washer fluid pump may be caused if the lever is pulled toward you and held continually. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 198: Rear Window Wiper And Washer
4-3. Operating the lights and wipers Rear window wiper and washer Operating instructions The wiper operation is selected by moving the lever as follows: For U.S.A.  Intermittent window wiper operation Normal window wiper operation For Canada  Intermittent window wiper operation Normal window wiper operation...
Page 199 Do not operate the switch continually as the washer fluid pump may over- heat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 200: Refueling Opening The Fuel Tank Cap
4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Vehicles without a smart key system Turn the engine switch to the “LOCK” position and ensure that all the doors and windows are closed.
Page 201 4-4. Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity.
Page 202 4-4. Refueling Opening the fuel tank cap Press the opener to open the fuel filler door. Turn the fuel tank cap slowly to remove it and hang it on the back of the fuel filler door. ■ When the fuel filler door cannot be opened Open the back door and remove the cover underneath the luggage compart- ment light.
Page 203 WARNING ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 204: Toyota Safety Sense P
■ Toyota Safety Sense P The Toyota Safety Sense P is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.
Page 205 Toyota will not disclose the recorded data to a third party except: • With the consent of the vehicle owner or with the consent of the lessee if the vehicle is leased •...
Page 206 4-5. Using the driving support systems Sensors Two types of sensors, located behind the front grille and windshield, detect information necessary to operate the drive assist systems. Radar sensor Camera sensor WARNING ■ To avoid malfunction of the radar sensor Observe the following precautions.
Page 207 Do not subject the radar sensor or surrounding area to a strong impact. If the radar sensor, front grille, or front bumper has been subjected to a strong impact, have the vehicle inspected by your Toyota dealer. ● Do not disassemble the radar sensor.
Page 208 ● Do not attach any accessories that may obstruct the camera sensor to the hood, front grille or front bumper. Contact your Toyota dealer for details. ● If a surfboard or other long object is to be mounted on the roof, make sure that it will not obstruct the camera sensor.
Page 209 4-5. Using the driving support systems ■ Certification C-HR_OM_USA_OM10526U...
Page 210 4-5. Using the driving support systems C-HR_OM_USA_OM10526U...
Page 211: Pcs (Pre-Collision System)
The pre-collision system can be disabled/enabled and the warning timing can be changed. (→P. 215) : Depending on the region in which the vehicle was sold, the pedestrian detection function may not be available. Contact your Toyota dealer for details. C-HR_OM_USA_OM10526U...
Page 212 4-5. Using the driving support systems ◆ Pre-collision warning When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi- information display to urge the driver to take evasive action.
Page 213 4-5. Using the driving support systems WARNING ■ Limitations of the pre-collision system ● The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-collision system instead of normal braking operations under any circumstances.
Page 214 4-5. Using the driving support systems WARNING ■ When to disable the pre-collision system In the following situations, disable the system, as it may not operate prop- erly, possibly leading to an accident resulting in death or serious injury: ● When the vehicle is being towed ●...
Page 215 4-5. Using the driving support systems Changing settings of the pre-collision system ■ Enabling/disabling the pre-collision system The pre-collision system can be enabled/disabled on the multi-information display as following: The system is automatically enabled each time the engine switch is turned to the “ON”...
Page 216 4-5. Using the driving support systems ■ Changing the pre-collision warning timing The pre-collision warning timing can be changed on the multi-infor- mation display as following: The operation timing setting is retained when the engine switch is turned off. Press “<” or “>” of meter control switches and select Press “∧”...
Page 217 4-5. Using the driving support systems ■ Operational conditions Availability of the pedestrian detection function depends on the region in which the vehicle was sold. Regions Function availability Region A The pedestrian detection function is available Region B The pedestrian detection function is not available Read the following for details: Region A ...
Page 218 4-5. Using the driving support systems Region B  (The pedestrian detection function is not available) The pre-collision system is enabled and the system determines that the pos- sibility of a frontal collision with a vehicle is high. Each function is operational at the following speeds: ●...
Page 219 4-5. Using the driving support systems ■ Pedestrian detection function The pre-collision system detects pedestri- ans based on the size, profile, and motion of a detected object. However, a pedes- trian may not be detected depending on the surrounding brightness motion, posture, angle...
Page 220 4-5. Using the driving support systems ■ Conditions under which the system may operate even if there is no pos- sibility of a collision ● In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate. •...
Page 221 4-5. Using the driving support systems • When driving on a narrow path surrounded by a structure, such as in a tunnel or on an iron bridge • When there is a metal object (manhole cover, steel plate, etc.), steps, or a protrusion on the road surface or roadside •...
Page 222 4-5. Using the driving support systems • When there are patterns or paint on the road or a wall that may be mis- taken for a vehicle or pedestrian • When driving near an object that reflects radio waves, such as a large truck or guardrail •...
Page 223 4-5. Using the driving support systems • When a vehicle ahead is not directly in front of your vehicle • When driving in inclement weather such as heavy rain, fog, snow or a sandstorm • When the vehicle is hit by water, snow, dust, etc., from a vehicle ahead •...
Page 224 4-5. Using the driving support systems ● In some situations such as the following, sufficient braking force may not be obtained, preventing the system from performing properly: • If the braking functions cannot operate to their full extent, such as when the brake parts are extremely cold, extremely hot, or wet •...
Page 225 ● If the PCS warning light continues to flash or illuminate, or the warning mes- sage does not disappear, the system may be malfunctioning. Have the vehi- cle inspected by your Toyota dealer immediately. ■ If VSC is disabled ●...
Page 226: Lda (Lane Departure Alert With Steering Control)
4-5. Using the driving support systems LDA (Lane Departure Alert with steering control) Summary of functions When driving on highways and freeways with white (yellow) lines, this function alerts the driver when the vehicle might depart from its lane and provides assistance by operating the steering wheel to keep the vehicle in its lane.
Page 227 4-5. Using the driving support systems ◆ Steering control function When the system determines that the vehicle might depart from its lane, the system pro- vides assistance as necessary by operating the steering wheel in small amounts for a short period of time to keep the vehi- cle in its lane.
Page 228 4-5. Using the driving support systems WARNING ■ Before using LDA system Do not rely solely upon the LDA system. The LDA system does not auto- matically drive the vehicle or reduce the amount of attention that must be paid to the area in front of the vehicle. The driver must always assume full responsibility for driving safely by always paying careful attention to the sur- rounding conditions and operating the steering wheel to correct the path of the vehicle.
Page 229 Do not install or place anything on the hood or grille. Also, do not install a grille guard (bull bars, kangaroo bar, etc.). ● If your windshield needs repairs, contact your Toyota dealer. Turning LDA system on Press the LDA switch to turn the LDA system on.
Page 230 4-5. Using the driving support systems Indications on multi-information display LDA indicator The illumination condition of the indicator informs the driver of the system operation status. Illuminated in white: LDA system is operating. Illuminated in green: Steering wheel assistance of the steering control function is operat- ing.
Page 231 4-5. Using the driving support systems ■ Operation conditions of each function ● Lane departure alert function This function operates when all of the following conditions are met. • LDA is turned on. • Vehicle speed is approximately 32 mph (50 km/h) or more. •...
Page 232 4-5. Using the driving support systems ■ Temporary cancellation of functions When operation conditions are no longer met, a function may be temporarily canceled. However, when the operation conditions are met again, operation of the function is automatically restored. (→P. 231) ■...
Page 233 4-5. Using the driving support systems ● The vehicle is driven on a road surface that is wet due to rain, puddles, etc. ● The traffic lines are yellow (which may be more difficult to recognize than lines that are white). ●...
Page 234 Warning message Details/Actions “Lane Departure The system may not be operating properly. Alert → Have the vehicle inspected at your Toyota Malfunction. dealer. Visit Your Dealer.” Dirt, rain, condensation, ice, snow, etc., are present on the windshield in front of the camera “Front Camera...
Page 235 4-5. Using the driving support systems ■ Customization The following settings can be changed. Function Setting details Lane departure alert function Adjust alert sensitivity Steering control function Turn steering wheel assistance on and off Turn function on and off Vehicle sway warning Adjust alert sensitivity For how to change settings, refer to P.
Page 236: Dynamic Radar Cruise Control With Full-Speed Range
4-5. Using the driving support systems Dynamic radar cruise control with full-speed range Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates, decelerates and stops to match the speed changes of the preceding vehicle even if the accelerator pedal is not depressed. In constant speed control mode, the vehicle runs at a fixed speed.
Page 237 4-5. Using the driving support systems WARNING ■ Before using dynamic radar cruise control with full-speed range Driving safely is the sole responsibility of the driver. Do not rely solely on the system, and drive safely by always paying careful attention to your sur- roundings.
Page 238 4-5. Using the driving support systems WARNING ■ To avoid inadvertent dynamic radar cruise control with full-speed range activation Switch the dynamic radar cruise control with full-speed range off using the “ON-OFF” button when not in use. ■ Situations unsuitable for dynamic radar cruise control with full-speed range Do not use dynamic radar cruise control with full-speed range in any of the following situations.
Page 239 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 328 ft. (100 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
Page 240 4-5. Using the driving support systems Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle dis- tance switch.
Page 241 4-5. Using the driving support systems Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the “ON-OFF” button to activate the cruise control. Radar cruise control indicator will come on and a message will be displayed on the multi-information display. Press the button again to deacti- vate the cruise control.
Page 242 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed (Except when the vehicle has been stopped by system control in vehi- cle-to-vehicle distance control...
Page 243 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis- tance control mode) Pressing the button changes the Preceding vehicle mark vehicle-to-vehicle distance as fol- lows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to the “ON”...
Page 244 4-5. Using the driving support systems Resuming follow-up cruising when the vehicle has been stopped by system control (vehicle-to-vehicle distance control mode) After the vehicle ahead of you starts off, push the lever up. Your vehicle will also resume follow-up cruising if the accelera- tor pedal is depressed after the vehicle ahead of you starts off.
Page 245 4-5. Using the driving support systems Approach warning (vehicle-to-vehicle distance control mode) When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver.
Page 246 4-5. Using the driving support systems Selecting constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar sensor, etc.
Page 247 • The driver’s door is opened. • The vehicle has been stopped for about 3 minutes. If vehicle-to-vehicle distance control mode is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer. C-HR_OM_USA_OM10526U...
Page 248 Pre-collision braking is activated. If constant speed control mode is automatically canceled for any other rea- son, there may be a malfunction in the system. Contact your Toyota dealer. ■ Warning messages and buzzers for dynamic radar cruise control with...
Page 249 4-5. Using the driving support systems ● Vehicles with small rear ends (trailers with no load on board, etc.) ● Motorcycles traveling in the same lane ● When water or snow thrown up by the surrounding vehicles hinders the detecting of the sensor ●...
Page 250 4-5. Using the driving support systems ■ Conditions under which the vehicle-to-vehicle distance control mode may not function correctly In the case of the following conditions, operate the brake pedal (or accelera- tor pedal, depending on the situation) as necessary. As the sensor may not be able to correctly detect vehicles ahead, the system may not operate properly.
Page 251: Driving Mode Select
4-5. Using the driving support systems Driving mode select In response to driving conditions, one of 3 drive modes can be selected. Select the drive mode ■ Changing the driving mode To select the drive mode, perform operations on the multi-information display.
Page 252 4-5. Using the driving support systems ■ Driving modes ● “NORMAL” mode Provides an optimal balance of fuel economy, quietness, and dynamic performance. Suitable for city driving. ● “SPORT” mode Controls the transmission and engine to provide quick, powerful acceleration. This mode also changes the steering feel, making it suitable for when agile driving response is desired, such as when driving on roads with many curves.
Page 253: (Blind Spot Monitor)
4-5. Using the driving support systems ∗ BSM (Blind Spot Monitor) Summary of the Blind Spot Monitor The Blind Spot Monitor is a system that has 2 functions; ● The BSM (Blind Spot Monitor) function Assists the driver in making the decision when changing lanes ●...
Page 254 4-5. Using the driving support systems Outside rear view mirror indicators BSM function: When a vehicle is detected in a blind spot of the outside rear view mirrors or approaching rapidly from behind into a blind spot, the outside rear view mirror indicator on the detected side will illuminate.
Page 255 Also, the sensor may not function normally when used in extremely hot or cold weather. ■ When “Blind Spot Monitor System Malfunction Visit Your Dealer.” is shown on the multi-information display There may be a sensor malfunction or misaligned. Have the vehicle inspected by your Toyota dealer. C-HR_OM_USA_OM10526U...
Page 256 4-5. Using the driving support systems ■ Certification for the Blind Spot Monitor For vehicles sold in U.S.A.  FCC ID : OAYSRR3A This devise complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 257 Do not attach accessories or stickers to the sensor or surrounding area on the bumper. ● Do not modify the sensor or surrounding area on the bumper. ● Do not paint the rear bumper any color other than an official Toyota color. C-HR_OM_USA_OM10526U...
Page 258: Bsm Function
4-5. Using the driving support systems BSM function The BSM function uses radar sensors to detect the following vehicles traveling in adjacent lanes and advises the driver of the presence of such vehicles via the indicators on the outside rear view mirrors. Vehicles that are traveling in areas that are not visible using the out- side rear view mirrors (the blind spots) Vehicles that are approaching rapidly from behind in areas that are...
Page 259 4-5. Using the driving support systems BSM function detection areas The areas that vehicles can be detected in are outlined below. The range of each detection area is: Approximately 1.6 ft. (0.5 m) to 11.5 ft. (3.5 m) from either side of the vehicle : The area between the side of the vehicle and 1.6 ft.
Page 260 4-5. Using the driving support systems WARNING ■ Cautions regarding the use of the system The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. The Blind Spot Monitor function is a supplementary function which alerts the driver that a vehicle is present in the blind spot.
Page 261 4-5. Using the driving support systems ■ Conditions under which the BSM function may not function correctly ● The BSM function may not detect vehicles correctly in the following situa- tions: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •...
Page 262 4-5. Using the driving support systems ● Instances of the BSM function unnecessarily detecting a vehicle and/or object may increase in the following situations: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •...
Page 263: Rcta Function
4-5. Using the driving support systems RCTA function The RCTA functions when your vehicle is in reverse. It can detect other vehicles approaching from the right or left rear of the vehicle. It uses radar sensors to alert the driver of the other vehicle’s existence through flashing the outside rear view mirror indicators and sounding a buzzer.
Page 264 4-5. Using the driving support systems RCTA function detection areas The areas that vehicles can be detected in are outlined below. To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away. Example: Approximate Approaching vehicle...
Page 265 4-5. Using the driving support systems ■ Conditions under which the RCTA function will not detect a vehicle The RCTA function is not designed to detect the following types of vehicles and/or objects: ● Vehicles approaching from directly behind ● Vehicles backing up in a parking space next to your vehicle ●...
Page 266 4-5. Using the driving support systems • When backing up on a slope with a sharp change in grade • When backing out of a shallow angle parking spot • Immediately after the RCTA function is set to on • Immediately after the engine is started with the RCTA function is set to on •...
Page 267 4-5. Using the driving support systems ● Instances of the RCTA function unnecessarily detecting a vehicle and/or object may increase in the following situations: • When a vehicle passes by the side of your vehicle • When the parking space faces a street and vehicles are being driven on the street •...
Page 268: Rear View Monitor System
4-5. Using the driving support systems Rear view monitor system The rear view monitor system assists the driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen.
Page 269 4-5. Using the driving support systems ■ When using the rear view monitor system The anti-glare function of the inside rear view mirror will be can- celed. ■ Display mode The rear view monitor display mode can be adjusted when the engine switch is in the “ON”...
Page 270 4-5. Using the driving support systems Using the rear view monitor system ■ Screen description Vehicles without a smart key system  The rear view monitor system screen will be displayed if the shift lever is shifted to R while the engine switch is in the “ON” position. Vehicles with a smart key system ...
Page 271 4-5. Using the driving support systems Rear view monitor system precautions ■ Area displayed on screen The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. • The area displayed on the screen may vary according to vehicle orientation conditions.
Page 272 4-5. Using the driving support systems ■ Rear view monitor system camera The camera for the rear view monitor system is located as shown in the illustration. ● Using the camera If dirt or foreign matter (such as water droplets, snow, mud, etc.) is adhering to the camera, it cannot transmit a clear image.
Page 273 4-5. Using the driving support systems ● When the ground behind the vehicle slopes up sharply The distance guide lines will appear to be closer to the vehicle than the actual dis- tance. Because this, objects will appear to be far- ther away than they actually are.
Page 274 4-5. Using the driving support systems ● When any part of the vehicle sags When any part of the vehicle sags due to the number of passengers or the distribu- tion of the load, there is a margin of error between the fixed guide lines on the screen and the actual dis- A margin of error...
Page 275 4-5. Using the driving support systems ● Distance guide lines Visually check the surround- ings and the area behind the vehicle. On the screen, it appears that a truck is park- ing at point . However, in reality if you back up to point , you will hit the truck.
Page 276 If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer. Likely cause Solution  The image is difficult to see •...
Page 277 4-5. Using the driving support systems WARNING ■ When using the rear view monitor system The rear view monitor system is a supplemental device intended to assist the driver when backing up. When backing up, be sure to check visually behind and all around the vehicle before proceeding.
Page 278 Doing so may result in the camera malfunc- tioning. ● Do not expose the camera to strong impact as this could cause a malfunc- tion. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. C-HR_OM_USA_OM10526U...
Page 279: Driving Assist Systems
4-5. Using the driving support systems Driving assist systems To keep driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehi- cle.
Page 280 4-5. Using the driving support systems When the TRAC/VSC systems are operating The slip indicator light will flash while the TRAC/VSC systems are operating. Disabling the TRAC system If the vehicle gets stuck in mud, dirt or snow, the TRAC system may reduce power from the engine to the wheels.
Page 281 When the message is displayed on the multi-information display show- ing that TRAC has been disabled even if has not been pressed TRAC cannot be operated. Contact your Toyota dealer. ■ Sounds and vibrations caused by the ABS, brake assist, VSC, TRAC and hill-start assist control systems ●...
Page 282 4-5. Using the driving support systems ■ EPS operation sound When the steering wheel is operated, a motor sound (whirring sound) may be heard. This does not indicate a malfunction. ■ Automatic reactivation of TRAC and VSC systems After turning the TRAC and VSC systems off, the systems will be automati- cally re-enabled in the following situations: ●...
Page 283 4-5. Using the driving support systems WARNING ■ The ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). ● The vehicle hydroplanes while driving at high speed on wet or slick roads. ■...
Page 284 The ABS, TRAC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause a system to malfunction.
Page 285: Driving Tips
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 286 If the shift lever can be shifted from P, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. Selecting tire chains 17-inch tires ...
Page 287 4-6. Driving tips Regulations on the use of tire chains Regulations regarding the use of tire chains vary depending on loca- tion and type of road. Always check local regulations before installing chains. ■ Tire chain installation Observe the following precautions when installing and removing chains: ●...
Page 288 NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 289: Interior Features
Interior features 5-1. Using the air conditioning 5-3. Using the storage system and defogger features Air conditioning system ..290 List of storage features ..303 • Glove box...... 304 Seat heaters...... 298 • Console box....304 5-2. Using the interior lights •...
Page 290: Air Conditioning System
5-1. Using the air conditioning system and defogger Air conditioning system Air outlets are automatically selected and fan speed is automati- cally adjusted according to the set temperature setting. Air conditioning controls ■ Adjusting the temperature setting Increases the temperature Decreases the temperature C-HR_OM_USA_OM10526U...
Page 291 5-1. Using the air conditioning system and defogger ■ Fan speed setting Increases the fan speed Decreases the fan speed Press to turn the fan off. ■ Change the airflow mode To change the airflow mode, move the airflow change knob upward or downward.
Page 292 5-1. Using the air conditioning system and defogger Using automatic mode Press The dehumidification function begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature set- ting. Adjust the temperature setting. To stop the operation, press ■...
Page 293 5-1. Using the air conditioning system and defogger Other functions ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time is pressed. ■...
Page 294 5-1. Using the air conditioning system and defogger ■ Climate control customization Climate control setting can be changed. Press The air conditioning is controlled with low fuel consumption prioritized such as reducing fan speed, etc. Air outlets ■ Location of air outlets The air outlets and air volume change according...
Page 295 5-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
Page 296 5-1. Using the air conditioning system and defogger ■ When the outside temperature exceeds 75°F (24°C) and the air condition- ing system is on ● In order to reduce the air conditioning power consumption, the air condition- ing system may switch to recirculated air mode automatically. This may also reduce fuel consumption.
Page 297 5-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, block- ing your vision.
Page 298: Seat Heaters
5-1. Using the air conditioning system and defogger ∗ Seat heaters Seat heaters heat the front seats. WARNING ● Care should be taken to prevent injury if anyone in the following categories comes in contact with the seats when the heater is on: •...
Page 299 5-1. Using the air conditioning system and defogger Operating instructions Each time the switch is pressed, the operation condition changes as follows. Hi (3 segments lit) → Mid (2 seg- ments lit) → Lo (1 segment lit) → The level indicator (amber) light up during operation.
Page 300: 5-2. Using The Interior Lights
5-2. Using the interior lights Interior lights list Vanity lights (if equipped) (→P. 313) Front interior light/front personal lights (→P. 301, 302) Rear interior light (→P. 301) Engine switch light (vehicles with a smart key system) Glove box light (→P. 304) C-HR_OM_USA_OM10526U...
Page 301: Interior Lights
5-2. Using the interior lights Interior lights ■ Front Turns the door position on/off ■ Rear Door position C-HR_OM_USA_OM10526U...
Page 302: Personal Lights
5-2. Using the interior lights Personal lights Turns the lights on/off When the lights are on due to the door link switch, a light will not turn off even if its switch is pressed. ■ Illuminated entry system Vehicles without a smart key system ...
Page 303: List Of Storage Features
5-3. Using the storage features List of storage features Glove box (→P. 304) Cup holders (→P. 306) Bottle holders (→P. 305) Console box (→P. 304) WARNING ● Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: •...
Page 304: Glove Box
5-3. Using the storage features Glove box Press the button to open the glove box. The glove box light turns on when the tail lights are on. Console box Lift the lid while pulling up the knob. C-HR_OM_USA_OM10526U...
Page 305: Bottle Holders
5-3. Using the storage features Bottle holders Front Rear   ● When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape. WARNING Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 306: Cup Holders
5-3. Using the storage features Cup holders The depth of the rear side cup holder can be changed as shown in the illustration. WARNING Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking, causing injury.
Page 307: Luggage Compartment Features
5-3. Using the storage features Luggage compartment features Cargo hooks Cargo hooks are provided for securing loose items. WARNING To avoid injury, always return the cargo hooks to their positions when they are not in use. Grocery bag hooks NOTICE Do not hang any object heavier than 4.4 lb.
Page 308 5-3. Using the storage features Auxiliary boxes Lift the deck mat tab and pull it toward you to remove it. Side auxiliary boxes C-HR_OM_USA_OM10526U...
Page 309 5-3. Using the storage features Luggage cover Type A  Unhook the cords and return the luggage cover to horizontal position. Pull it toward you and then lift the luggage cover to remove it. Installation position Confirm that the cover has been securely installed to the original position when installing.
Page 310 5-3. Using the storage features Type B  ■ Removing the luggage cover Unhook the cords. Unhook the hook to the hook brackets. ■ Stowing the luggage cover Hold the luggage cover with both hands. Point your thumbs in opposite direc- tions.
Page 311 5-3. Using the storage features Bend one side of the cover towards you. Twist the other side in the opposite direction, as shown in the illustration. Make a small circle, then fold it inward. Make sure the three circles are side by side. C-HR_OM_USA_OM10526U...
Page 312 5-3. Using the storage features Make sure the luggage cover is properly folded. WARNING ● Do not place anything on the luggage cover. In the event of sudden brak- ing or turning, the item may go flying and strike an occupant. This could lead to an unexpected accident, resulting in death or serious injury.
Page 313: Using The Other Interior
5-4. Using the other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirrors Slide the cover to open.
Page 314: Clock
5-4. Using the other interior features Clock The clock can be adjusted by pressing and holding the buttons. Adjusts the hours Adjusts the minutes ● Vehicles without a smart key system: The clock is displayed when the engine switch is in the “ACC” or “ON” posi- tion.
Page 315: Power Outlet
5-4. Using the other interior features Power outlet Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). When using electronic goods, make sure that the power consumption of all the connected power outlets is less than 120 W. Lift the lid while pulling up the knob and open the console box.
Page 316: Assist Grips
5-4. Using the other interior features Assist grips An assist grip installed on the ceil- ing can be used to support your body while sitting on the seat. WARNING Do not use the assist grip when getting in or out of the vehicle or rising from your seat.
Page 317: Steering Wheel Audio Switches
Steering wheel audio switches Some audio features (audio volume control, radio, CD player, etc.) can be controlled using the switches on the steering wheel. For more information, please refer to the “TOYOTA Audio System Owner’s Manual” or “TOYOTA Navigation System Owner’s Manual”. WARNING To reduce the risk of an accident, exercise care when operating the audio switches on the steering wheel.
Page 318: Using The Microphone
Using the microphone The microphone can be used for the voice command in the ® Bluetooth audio system or the hands-free phone system. For more information, please refer to the “TOYOTA Audio System Owner’s Manual” or “TOYOTA Navigation System Owner’s Manual”.
Page 319: Maintenance And Care
Maintenance and care 6-1. Maintenance and care 6-2. Maintenance Cleaning and protecting Maintenance the vehicle exterior..320 requirements ....327 Cleaning and protecting General maintenance..330 the vehicle interior... 324 Emission inspection and maintenance (I/M) programs......334 6-3. Do-it-yourself maintenance Do-it-yourself service precautions .....
Page 320: Maintenance And Care Cleaning And Protecting
6-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 321 6-1. Maintenance and care ■ Automatic car washes ● Fold the mirrors before washing the vehicle. Start washing from the front of the vehicle. Make sure to extend the mirrors before driving. ● Brushes used in automatic car washes may scratch the vehicle surface and harm your vehicle's paint.
Page 322 Precaution regarding the rear bumper with Blind Spot Monitor (if equipped) If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, consult your Toyota dealer. NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels, etc.)
Page 323 6-1. Maintenance and care NOTICE ■ Cleaning the exterior lights ● Wash carefully. Do not use organic substances or scrub with a hard brush. This may damage the surfaces of the lights. ● Do not apply wax to the surfaces of the lights. Wax may cause damage to the lenses.
Page 324: Cleaning And Protecting The Vehicle Interior
6-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
Page 325 6-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 326 6-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Page 327: Maintenance
Toyota recommends the following main- tenance: General maintenance General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer. Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.
Page 328 ■ Repair and replacement It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 329 6-2. Maintenance WARNING ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible death or serious injury. ■ Handling of the battery ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
Page 330: General Maintenance
“Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement/Sched- uled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment...
Page 331 6-2. Maintenance Vehicle interior Items Check points • The accelerator pedal should move smoothly Accelerator pedal (without uneven pedal effort or catching). Continuously variable • When parked on a slope and the shift lever is transmission “Park” in P, is the vehicle securely stopped? mechanism •...
Page 332 6-2. Maintenance Items Check points • Do the head restraints move smoothly and Head restraints lock securely? • Do the indicators and buzzers function prop- Indicators/buzzers erly? Lights • Do all of the lights come on? • Does the parking brake switch operate nor- mally? Parking brake •...
Page 333 6-2. Maintenance Vehicle exterior Items Check points Doors • Do the doors operate smoothly? • Does the engine hood lock system work prop- Engine hood erly? • There should not be any signs of fluid leakage Fluid leaks after the vehicle has been parked. •...
Page 334: Emission Inspection And Maintenance (I/M) Programs
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test in the following situations: ●...
Page 335: 6-3. Do-It-Yourself Maintenance
(→P. 347) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- life hybrid organic acid technology For the U.S.A.:...
Page 336 6-3. Do-it-yourself maintenance Items Parts and tools • Bulb with same number and wattage rating as origi- Light bulbs (→P. 381) • Phillips-head screwdriver • Flathead screwdriver • Wrench Radiator and con- ⎯ → P. 346) denser ( Tire inflation •...
Page 337 6-3. Do-it-yourself maintenance WARNING ■ When working near the electric cooling fan or radiator grille Vehicles without a smart key system: Be sure the engine switch is off. With the engine switch in the “ON” position, the electric cooling fan may automat- ically start to run if the air conditioning is on and/or the coolant temperature is high.
Page 338: Hood
6-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Move the auxiliary catch lever to side direction and lift the hood.
Page 339 6-3. Do-it-yourself maintenance WARNING ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 340: Positioning A Floor Jack
6-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.
Page 341: Engine Compartment
6-3. Do-it-yourself maintenance Engine compartment Washer fluid tank (→P. 352) Battery (→P. 349) Engine coolant reservoir Brake fluid reservoir (→P. 345) (→P. 347) Fuse boxes (→P. 377) Electric cooling fan Engine oil filler cap Condenser (→P. 346) (→P. 343) Radiator (→P.
Page 342 6-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 343 6-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 344 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. ●...
Page 345 If the coolant level drops within a short time of replenishing Visually check the radiator, hoses, engine coolant reservoir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system.
Page 346 Radiator and condenser Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING ■...
Page 347 6-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. ■ Adding fluid Slide and lift up the rubber strip to partly remove it as shown. Disconnect the claws and remove the service cover.
Page 348 It is normal for the brake fluid level to go down slightly as the brake pads wear out or when the fluid level in the accumulator is high. However, if the reservoir needs frequent refilling, there may be a serious problem. Have the vehicle inspected at your Toyota dealer as soon as pos- sible.
Page 349 6-3. Do-it-yourself maintenance Battery Check the battery as follows. ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp ■ Checking battery fluid If there are lines on the side of the battery: Check that the level is between the upper and lower lines.
Page 350 Take extra care when connecting the bat- tery if the engine switch mode prior to discharge is unknown. If the system will not start even after multiple attempts at all methods above, contact your Toyota dealer.
Page 351 6-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ●...
Page 352 6-3. Do-it-yourself maintenance Washer fluid Add washer fluid in the following situations: ● A washer does not work. ● The warning message appears on the multi-information display (if equipped). ● The washer fluid level extremely low. Raise the cap keeping your finger pressed down on the hole in the center and check the fluid level in the tube.
Page 353: Tires
Replace the tires if the treadwear indicators are showing on a tire. Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection. Front...
Page 354 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valves and transmitter ID codes registered by your Toyota dealer. (→P. 356) ◆ Initializing the tire pressure warning system When the tire size is changed, the tire pressure warning system must be initialized.
Page 355 6-3. Do-it-yourself maintenance ■ How to initialize the tire pressure warning system Park the vehicle in a safe place and turn the engine switch to the “LOCK” position (vehicles without a smart key system) or off (vehicles with a smart key system). Initialization cannot be performed while the vehicle is moving.
Page 356 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not reg- istered, the tire pressure warning system will not work properly.
Page 357 6-3. Do-it-yourself maintenance ■ Maximum load of tire Check that the maximum load of the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings (GAWR) of either the front axle or the rear axle, whichever is greater. For the GAWR, see the Certification Label.
Page 358 ● In the following cases, the tire pressure warning system may not operate properly. • If non-genuine Toyota wheels are used. • A tire has been replaced with a tire that is not an OE (Original Equip- ment) tire. • A tire has been replaced with a tire that is not of the specified size.
Page 359 If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ● When operating the initialization of the system, the tire pressure warning light does not blink 3 times and the setting message does not appear on the multi-information display.
Page 360 6-3. Do-it-yourself maintenance ■ Tire pressure warning system certification For vehicles sold in the U.S.A.  FCC ID: PAXPMVC015 NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 361 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 362 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 363: Tire Inflation Pressure
6-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire infla- tion pressure and tire size are dis- played on the tire and loading information label. (→P. 456)
Page 364 6-3. Do-it-yourself maintenance Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the tire valve cap. Press the tip of the tire pressure gauge onto the tire valve. Read the pressure using the gauge gradations. If the tire inflation pressure is not at the recommended level, adjust the pressure.
Page 365 Reduced tire life due to wear ● Reduced safety ● Damage to the drivetrain If a tire needs frequent inflating, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 366 6-3. Do-it-yourself maintenance WARNING ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: ●...
Page 367: Wheels
● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 368 6-3. Do-it-yourself maintenance WARNING ■ When replacing wheels ● Do not use wheels that are a different size from those recommended in the Owner’s Manual, as this may result in a loss of handling control. ● Never use an inner tube in a leaking wheel which is designed for a tubeless tire.
Page 369 Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 370: Air Conditioning Filter
6-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Turn the engine switch off. Open the glove box. Slide off the damper. Push in each side of the glove box to disconnect the claws, and then slowly and fully open the glove box while supporting...
Page 371 6-3. Do-it-yourself maintenance With the glove box fully open, slightly lift up the glove box and pull toward the seat to detach the bottom of the glove box. Do not use excessive force if the glove box does not detach when lightly pulled.
Page 372 6-3. Do-it-yourself maintenance ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Schedule maintenance guide”...
Page 373: Wireless Remote Control/Electronic Key Battery
6-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery Vehicles without a smart key system: CR1620 Vehicles with a smart key system: CR2032 Replacing the battery Vehicles without a smart key system...
Page 374 6-3. Do-it-yourself maintenance Remove the depleted battery using a small flathead screw- driver. Insert a new battery with the “+” terminal facing up. When installing, reverse the steps listed. Vehicles with a smart key system  Release the lock and take out the mechanical key.
Page 375 Use a CR1620 (vehicles without a smart key system) or CR2032 (vehicles with a smart key system) lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manu- facturer.
Page 376 6-3. Do-it-yourself maintenance WARNING ■ Removed battery and other parts These parts are small and if swallowed by a child, they can cause choking. Keep away from children. Failure to do so could result in death or serious injury. NOTICE ■...
Page 377: Checking And Replacing Fuses
6-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Turn the engine switch off. Open the fuse box cover. Engine compartment type A fuse box ...
Page 378 6-3. Do-it-yourself maintenance Left side instrument panel  Remove the lid. Make sure to press the claw during removal or installation. Remove the fuse with the pull- out tool. Only type A fuses can be removed using the pullout tool.
Page 379 Except for type E: Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box lid. Type E: Contact your Toyota dealer. Type A Type B ...
Page 380 If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (→P. 381) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. ■ If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.
Page 381: Light Bulbs
Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 382 6-3. Do-it-yourself maintenance ■ Rear Rear side marker lights Rear turn signal lights Back-up lights License plate lights Replacing light bulbs ■ Headlights Turn the bulb base counter- clockwise. Unplug the connector while pressing the lock release.
Page 383 6-3. Do-it-yourself maintenance Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting and insert. Turn and secure the bulb base. Shake the bulb base gently to check that it is not loose, turn the headlights on once and visu- ally confirm that no light is leak- ing through the mounting.
Page 384 6-3. Do-it-yourself maintenance ■ Front turn signal lights Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 385 6-3. Do-it-yourself maintenance ■ Rear turn signal lights and rear side marker lights Open the back door and remove the cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Remove the 2 screws and pull the light unit toward the rear of the vehicle to remove Turn the bulb base counter-...
Page 386 6-3. Do-it-yourself maintenance Install the lamp assembly. Align the guide ( ) and pins ) on the lamp assembly with the mounting when installing it. Install the 2 screws. Install the cover.
Page 387 6-3. Do-it-yourself maintenance ■ Back-up lights Open the back door and remove the cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 388 6-3. Do-it-yourself maintenance ■ License plate lights Open the back door and remove the cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 389 6-3. Do-it-yourself maintenance ■ Side turn signal lights Insert a flathead screwdriver and release the claw for the outside rear view mirror cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Release the cover claws spanning over the entire perimeter.
Page 390 6-3. Do-it-yourself maintenance Insert a flathead screwdriver and remove the lens to the outside. Remove the socket from the side turn signal light housing. Remove the bulb. Replace the bulb and install the socket to the side turn signal light housing. Align the grooves of the socket to the side turn signal light hous- ing.
Page 391 6-3. Do-it-yourself maintenance Install the lens. Insert the claw of the lens. Attach the lens. Arrange the wire harness on the back side of the lens. Insert the claw of the cover. Attach the claw on the bot- tom part of the cover.
Page 392 ● Outer mirror illumination (if equipped) ■ LED light bulbs The following lights consist of a number of LEDs. If any of the LEDs burns out, take your vehicle to your Toyota dealer to have the light replaced. ● Parking lights/daytime running lights ●...
Page 393 6-3. Do-it-yourself maintenance WARNING ■ Replacing light bulbs ● Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb.
Page 394 6-3. Do-it-yourself maintenance...
Page 395: When Trouble Arises
When trouble arises 7-1. Essential information 7-2. Steps to take in an Emergency flashers ..396 emergency If your vehicle needs to If your vehicle has to be be towed ......399 stopped in an emergency ...... 397 If you think something is wrong ......
Page 396: Essential Information
7-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 397: If Your Vehicle Has To Be Stopped In An Emergency
7-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 398 7-1. Essential information Vehicles without a smart key system: Stop the engine by turning the engine switch to the “ACC” position. Vehicles with a smart key sys- tem: To stop the engine, press and hold the engine switch for 2 consecutive seconds or more, or press it briefly 3 times or Press and hold for 2 seconds or more in succession.
Page 399: If Your Vehicle Needs
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
Page 400 7-2. Steps to take in an emergency Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel-lift type truck From the front From the rear   Release the parking brake. Use a towing dolly under the front wheels.
Page 401 7-2. Steps to take in an emergency Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°.
Page 402 7-2. Steps to take in an emergency Emergency towing procedure Take out the towing eyelet. (→P. 424) Remove the eyelet cover using a flathead screwdriver. To protect the bodywork, place a rag between the screwdriver and the vehicle body as shown in the illustration.
Page 403 7-2. Steps to take in an emergency Securely attach cables or chains to the towing eyelet. Take care not to damage the vehicle body. Vehicles without a smart key system: Enter the vehicle being towed and start the engine. If the engine does not start, turn the engine switch to the “ON” position. Vehicles with a smart key system: Enter the vehicle being towed and start the engine.
Page 404 7-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When towing the vehicle Be sure to transport the vehicle with the front wheels raised or with all four wheels raised off the ground.
Page 405 7-2. Steps to take in an emergency NOTICE ■ To prevent damage to the vehicle when towing using a wheel-lift type truck ● Vehicles without a smart key system: Do not tow the vehicle from the rear when the engine switch is in the “LOCK” position or the key is removed. The steering lock mechanism is not strong enough to hold the front wheels straight.
Page 406: If You Think Something Is Wrong
7-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle.
Page 407: Fuel Pump Shut Off System
7-2. Steps to take in an emergency Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 408: If A Warning Light Turns On Or A Warning Buzzer Sounds
If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by your Toyota dealer. Warning light and warning buzzer list Warning light...
Page 409 Indicates a malfunction in: • The electronic engine control system; (U.S.A.) • The electronic throttle control system; or • The electronic continuously variable transmission. → Have the vehicle inspected by your Toyota dealer (Canada) immediately. SRS warning light Indicates a malfunction in: •...
Page 410 7-2. Steps to take in an emergency Warning light Warning light/Details/Actions Brake system warning light Indicates a malfunction in the electric parking brake → Have the vehicle inspected by your Toyota dealer (Yellow) immediately. PCS warning light When the warning light flashes (and a buzzer sounds): Indicates a malfunction in the PCS (Pre-Collision System) →...
Page 411 When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system (→P. 415) → Have the system checked by your Toyota dealer. High engine coolant temperature warning light (warning buzzer) Indicates that the engine coolant temperature is too high →...
Page 412 → Release the accelerator pedal and depress the brake pedal. Indicates a malfunction in the Brake Override System (with warning buzzer) → Have the vehicle inspected by your Toyota dealer immediately. Drive-Start Control Indicates that the shift position was changed and Drive- Start Control was operated while depressing the accelera- tor pedal.
Page 413 If the fuel tank is empty, refuel the vehicle imme- diately. The malfunction indicator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact your Toyota dealer. ■ Front passenger detection sensor, seat belt reminder and warning buzzer ●...
Page 414 7-2. Steps to take in an emergency ■ Warning light operations for unfastened rear passenger seat belts ● When opening and closing the rear door, the warning light comes on for approximately 34 seconds. ● When any of the rear seat belts are unfastened, the warning light comes on. When the rear doors are opened and closed while the warning light is on, the warning light will turn off after approximately 34 seconds.
Page 415 ■ If both the ABS and the brake system warning lights remain on Stop your vehicle in a safe place immediately and contact your Toyota dealer. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.
Page 416 7-2. Steps to take in an emergency WARNING ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 417 7-2. Steps to take in an emergency NOTICE ■ To ensure the tire pressure warning system operates properly Do not install tires with different specifications or makers, as the tire pressure warning system may not operate properly. C-HR_OM_USA_OM10526U...
Page 418: If A Warning Message Is Displayed
Multi-information display If any of the warning messages are shown again after the following actions have been performed, contact your Toyota dealer. : The master warning light may not come on or flash when a warning mes- sage is displayed.
Page 419 Messages and warnings The warning lights and warning buzzers operate as follows depending on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by your Toyota dealer immediately. System...
Page 420 The ABS warning light comes on. (→P. 409) ■ If “Visit Your Dealer” is shown The system or part shown on the multi-information display is malfunctioning. Have the vehicle inspected by your Toyota dealer. ■ If a message about an operation is shown ●...
Page 421 ■ If “Charging System Malfunction” is shown Indicates a malfunction in the vehicle’s charging system. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Continuing to drive the vehicle may be dangerous. ■ If “Engine Coolant Temperature high” is shown Indicates that the engine coolant temperature is too high.
Page 422 If this message is displayed but you have not had a new electronic key regis- tered, ask your Toyota dealer to check if an unknown electronic key (other than those in your possession) has been registered.
Page 423: If You Have A Flat Tire
7-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: →P. 353 WARNING ■ If you have a flat tire Do not continue driving with a flat tire.
Page 424 7-2. Steps to take in an emergency Location of the spare tire, jack and tools Towing eyelet Jack handle Wheel nut wrench Spare tire Jack C-HR_OM_USA_OM10526U...
Page 425 7-2. Steps to take in an emergency WARNING ■ Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
Page 426 7-2. Steps to take in an emergency Taking out the jack Remove the deck board. (→P. 308) Take out the jack. Taking out the spare tire Remove the deck board. (→P. 308) Remove the cushion. Loosen the center fastener that secures the spare tire.
Page 427 7-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 428 7-2. Steps to take in an emergency Assemble the jack handle and the wheel nut wrench as shown in the illustration. Raise the vehicle until the tire is slightly raised off the ground. Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid...
Page 429 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the tapered ends facing inward.
Page 430 7-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 431 7-2. Steps to take in an emergency ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily, and only in an emergency. ●...
Page 432 7-2. Steps to take in an emergency WARNING ■ When using the compact spare tire ● Remember that the compact spare tire provided is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle. ●...
Page 433 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 434: If The Engine Will Not Start
7-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce- dures are being followed (→P. 162, 165), consider each of the fol- lowing points: The engine will not start even though the starter motor operates normally.
Page 435 ● There may be a malfunction in the steering lock system. (vehicles with a smart key system) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart key system)
Page 436: If The Electronic Key Does Not Operate Properly (Vehicles With A Smart Key System)
Unlocks the door Turning the key rearward unlocks the driver’s door. Turning the key once again within 3 seconds unlocks the other doors. Opens the windows (turn and hold) : These settings must be customized at your Toyota dealer. (→P. 474) C-HR_OM_USA_OM10526U...
Page 437 ACCESSORY mode. Firmly depress the brake pedal and check that and mes- sages are shown on the multi-information display. Press the engine switch. In the event that the engine still cannot be started, contact your Toyota dealer. C-HR_OM_USA_OM10526U...
Page 438 7-2. Steps to take in an emergency ■ Stopping the engine Set the parking brake, shift the shift lever to P and press the engine switch as you normally do when stopping the engine. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted.
Page 439: If The Vehicle Battery Is Discharged
The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 440 7-2. Steps to take in an emergency Connect the jumper cables according to the following procedure: Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle.
Page 441 To install the engine cover, conduct the removal procedure in reverse. After installing, check that the fixed pins are inserted securely. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting.
Page 442 7-2. Steps to take in an emergency WARNING ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery: ● Make sure each jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any other than the intended terminal.
Page 443: If Your Vehicle Overheats
If you do not see steam: Carefully lift the hood. After the engine has cooled down sufficiently, inspect the hoses and radiator core (radia- tor) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact your Toyota dealer. C-HR_OM_USA_OM10526U...
Page 444 (The fan may not operate in freezing temperatures.) If the fan is not operating: Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 445 7-2. Steps to take in an emergency WARNING ■ When inspecting under the hood of your vehicle Observe the following precautions. Failure to do so may result in serious injury such as burns. ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided.
Page 446: If The Vehicle Becomes Stuck
7-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Shift the shift lever to P, and set the parking brake. Remove the mud, snow or sand from around the front wheels.
Page 447 7-2. Steps to take in an emergency WARNING ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
Page 448 7-2. Steps to take in an emergency C-HR_OM_USA_OM10526U...
Page 449: 8-1. Specifications
Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.) ..450 Fuel information ....458 Tire information ....461 8-2. Customization Customizable features ..474 8-3. Items to initialize Items to initialize ....482 C-HR_OM_USA_OM10526U...
Page 450: Maintenance Data
The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is also stamped on the top left of the instrument panel.
Page 451 8-1. Specifications This number is stamped under the right-hand front seat. This number is also on the Cer- tification Label. ■ Engine number The engine number is stamped on the engine block as shown. C-HR_OM_USA_OM10526U...
Page 452 8-1. Specifications Engine Model 3ZR-FAE Type 4-cylinder in line, 4-cycle, gasoline 3.17 × 3.84 in. (80.5 × 97.6 mm) Bore and stroke Displacement 121.3 cu.in. (1987 cm Valve clearance (engine Automatic adjustment cold) Drive belt tension Automatic adjustment Fuel Fuel type Unleaded gasoline only Octane rating 87 (Research Octane Number 91) or higher...
Page 453 8-1. Specifications ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toy- ota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil...
Page 454 Cooling system Capacity 6.1 qt. (5.7 L, 5.1 Imp.qt.) Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non-sili- Coolant type cate, non-amine, non-nitrite, and non-borate cool- ant with long-life hybrid organic acid technology Do not use plain water alone.
Page 455 NOTICE ■ Continuously variable transmission fluid type Using continuously variable transmission fluid other than “Toyota Genuine CVT Fluid FE” may cause deterioration in shift quality, locking up of the transmission accompanied by vibration and, ultimately, damage to the vehi- cle’s transmission.
Page 456 8-1. Specifications Tires and wheels 17-inch tires  Tire size 215/60R17 96H Front tires: Tire inflation pressure 33 psi (230 kPa, 2.3 kgf/cm or bar) (Recommended cold tire Rear tires: inflation pressure) 33 psi (230 kPa, 2.3 kgf/cm or bar) Wheel size 17 ×...
Page 457 8-1. Specifications Light bulbs Light bulbs Bulb No. Type Headlights 9012 Front side marker lights ― Front turn signal lights ― Side turn signal lights ― Exterior Rear side marker lights ― Rear turn signal lights ― Back-up lights License plate lights ―...
Page 458: Fuel Information
In very few cases, driveability problems may be caused by the brand of gaso- line you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Toyota dealer. ■...
Page 459 Gasolines containing oxygenates such as ethers and ethanol, as well as reformulated gasolines, are available in some cities. These fuels are typically acceptable for use, providing they meet other fuel requirements. Toyota recommends these fuels, since the formulations allow for reduced vehicle emissions. ■...
Page 460 Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
Page 461: Tire Information
8-1. Specifications Tire information Typical tire symbols Full-size tire  Compact spare tire  C-HR_OM_USA_OM10526U...
Page 462 8-1. Specifications Tire size (→P. 464) DOT and Tire Identification Number (TIN)(→P. 463) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators(→P. 353) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
Page 463 8-1. Specifications Typical DOT and Tire Identification Number (TIN) Type A Type B   DOT symbol Tire Identification Number (TIN) Tire manufacturer’s identification mark Tire size code Manufacturer’s optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year Manufacturer’s code : The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
Page 464 8-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits)
Page 465 8-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer C-HR_OM_USA_OM10526U...
Page 466 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Require- ments in addition to these grades.
Page 467 8-1. Specifications ■ Temperature A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissi- pate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 468 8-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation pres- parked for three hours or more, or has not sure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which Maximum...
Page 469 8-1. Specifications Tire related term Meaning The combined weight of installed regular pro- duction options weighing over 5 lb. (2.3 kg) in excess of the standard items which they Production options replace, not previously considered in curb weight weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim A metal support for a tire or a tire and tube...
Page 470 8-1. Specifications Tire related term Meaning A pneumatic tire in which the ply cords that extend to the beads are laid at alternate Bias ply tire angles substantially less than 90 degrees to the centerline of the tread The tire structure, except tread and sidewall Carcass rubber which, when inflated, bears the load The breaking away of pieces of the tread or...
Page 471 8-1. Specifications Tire related term Meaning A tire designated by its manufacturer as pri- Light truck (LT) tire marily intended for use on lightweight trucks or multipurpose passenger vehicles The maximum load that a tire is rated to carry Load rating for a given inflation pressure The load rating for a tire at the maximum per- Maximum load rating...
Page 472 8-1. Specifications Tire related term Meaning The linear distance between the exteriors of the sidewalls of an inflated tire, excluding ele- Section width vations due to labeling, decoration, or protec- tive bands That portion of a tire between the tread and Sidewall bead The parting of the rubber compound from the...
Page 473 8-1. Specifications Designated seating Occupant distribution Vehicle normal load, capacity, Number of in a normally loaded Number of occupants occupants vehicle 2 through 4 2 in front 2 in front, 1 in second 5 through 10 seat 2 in front, 1 in second 11 through 15 seat, 1 in third seat, 1 in fourth seat...
Page 474: 8-2. Customization
Customizable features Some function settings are changed simultaneously with other func- tions when customized. Contact your Toyota dealer for further details. Settings that can be changed using the multi-information display Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, —...
Page 475 8-2. Customization ■ Gauges, meters and multi-information display (→P. 86, 89) Customized Function Default setting setting English French Language km (km/L) miles (MPG) Units km (L/100 km) °F °C Eco Driving Indicator Light (Self-lighting) Current fuel consumption (gauge display) Drive information 1 Average fuel economy (after reset)
Page 476 8-2. Customization ■ Instrument cluster (→P. 92) Customized Function Default setting setting Sensor sensitivity for dark- ening the brightness of the instrument cluster Standard -2 to 2 — O depending on the outside brightness Sensor sensitivity returning the brightness of the instrument cluster to Standard -2 to 2...
Page 477 8-2. Customization ■ Smart key system (→P. 118) Customized Function Default setting setting Smart key system — O Smart door unlocking Driver’s door All the doors — O Number of consecutive As many as 2 times — O door lock operations desired : If equipped ■...
Page 478 8-2. Customization ■ Power windows (→P. 140) Customized Function Default setting setting mechanical linked operation — O (open) mechanical linked operation — O (close) Wireless remote control linked operation (open — O only) mechanical wireless remote — O control linked operation signal (buzzer) : Vehicles without a smart key system : Vehicles with a smart key system...
Page 479 8-2. Customization ■ PCS (Pre-Collision System) (→P. 211) Customized Function Default setting setting Pre-collision system Warning timing Middle Near ■ LDA (Lane Departure Alert with steering control) (→P. 226) Customized Function Default setting setting Steering assist Alert sensitivity Standard High Vehicle sway warning Vehicle sway warning sen- Standard...
Page 480 8-2. Customization ■ Illumination (→P. 300) Customized Function Default setting setting Time elapsed before the 15 seconds 7.5 seconds — O interior lights turn off 30 seconds Operation after the engine — O switch is turned off Operation when the doors —...
Page 481 8-2. Customization ■ In the following situations, customize mode in which the settings can be changed through the multi-information display will automatically be turned off ● A warning message appears after the customize mode screen is displayed. ● The engine switch is turned off. ●...
Page 482: 8-3. Items To Initialize
8-3. Items to initialize Items to initialize The following items must be initialized for normal system opera- tion after such cases as the battery being reconnected, or main- tenance being performed on the vehicle: Item When to initialize Reference Power window When functioning abnormally P.
Page 483: For Owners
For owners Reporting safety defects for U.S. owners......484 Seat belt instructions for Canadian owners (in French) ....... 485 SRS airbag instructions for Canadian owners (in French) ....... 487 C-HR_OM_USA_OM10526U...
Page 484: Reporting Safety Defects For U.s. Owners
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investiga- tion, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 485: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 486 AVERTISSEMENT ■ État et usure des ceintures de sécurité Inspectez les ceintures de sécurité périodiquement. Contrôlez qu’elles ne sont pas entaillées, effilochées, et que leurs ancrages ne sont pas desser- rés. Ne pas utiliser une ceinture de sécurité défectueuse avant qu’elle ne soit remplacée.
Page 487: Srs Airbag Instructions For Canadian Owners (In French)
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English. C-HR_OM_USA_OM10526U...
Page 488 ◆ Coussins gonflables SRS frontaux Coussin gonflable SRS conducteur/passager avant Participent à la protection de la tête et du thorax du conducteur et du passager avant contre les chocs avec les éléments de l’habitacle Coussin gonflable SRS de genoux pour le conducteur Participe à...
Page 489 Composition du système de coussins gonflables SRS C-HR_OM_USA_OM10526U...
Page 490 Capteurs d’impact avant Capteur de position du siège conducteur Coussin gonflable passager avant Coussin gonflable conducteur Témoins indicateurs “AIR Coussin gonflable de genoux BAG ON” et “AIR BAG OFF” conducteur Capteurs d’impact latéral Témoin d’alerte SRS (avant) Boîtier électronique Capteurs d’impact latéral coussins gonflables...
Page 491 AVERTISSEMENT ■ Précautions avec les coussins gonflables SRS Respectez les précautions suivantes concernant les coussins gonflables SRS. À défaut, des blessures graves, voire mortelles, pourraient s’ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter leur ceinture de sécurité...
Page 492 Installez dans un siège de sécurité enfant les enfants trop jeunes pour pouvoir utiliser la ceinture de sécurité. Toyota recommande vivement que tous les nourrissons et enfants soient installés dans les sièges arrière du véhicule et convenablement attachés.
Page 493 AVERTISSEMENT ■ Précautions avec les coussins gonflables SRS ● Ne pas s’asseoir sur le bord du siège et ne pas s’appuyer contre la planche de bord. ● Ne pas laisser un enfant rester debout devant coussin gonflable passager avant ni assis sur les genoux du passager avant.
Page 494 AVERTISSEMENT ■ Précautions avec les coussins gonflables SRS ● Ne rien fixer ou disposer sur la planche de bord, la garniture centrale du moyeu de volant de direction et la partie inférieure du tableau de bord. déploiement coussins gonflables SRS conducteur, passager avant et genoux pour le conducteur, tout objet risque de se transformer en projectile.
Page 495 Si les parties renfermant les coussins gonflables SRS, telles que la garniture centrale du volant de direction et les garnitures de montants avant et arrière, apparaissent abîmées ou craquelées, faites-les remplacer par votre concessionnaire Toyota. ● Ne rien poser sur le siège du passager avant, comme un coussin par exemple.
Page 496 SRS Ne mettez pas à la casse votre véhicule et ne lui apportez aucune des modifications suivantes sans consulter votre concessionnaire Toyota. Les coussins gonflables SRS peuvent ne pas fonctionner correctement ou se déployer (se gonfler) accidentellement, provoquant ainsi des blessures graves, voire mortelles.
Page 497: Index
Index What to do if... (Troubleshooting) ....498 Alphabetical index ..... 502 C-HR_OM_USA_OM10526U...
Page 498 You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by your Toyota dealer. (→P. 100) ● If you lose your keys or electronic keys, the risk of vehicle theft increases significantly.
Page 499 What to do if... (Troubleshooting) If you think something is wrong The engine does not start (vehicles without a smart key sys- tem) ● Is the shift lever in P? (→P. 162) ● Is the steering wheel unlocked? (→P. 163) ●...
Page 500 What to do if... (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without a smart key system: It is locked to prevent theft of the vehicle if the key is pulled from the engine switch.
Page 501 What to do if... (Troubleshooting) A warning buzzer sounds when leaving the vehicle (vehicles with a smart key system) ● Is the electronic key left inside the vehicle? Check the message on the multi-information display. (→P. 418) A warning light turns on or a warning message is displayed ●...
Page 502: Alphabetical Index
Alphabetical index Alphabetical index A/C ..........290 Back door......... 112 Air conditioning filter ..... 370 Back-up lights Replacing light bulb ....387 Wattage ........ 457 (Anti-lock Brake System)..279 Warning light......409 Battery ........349 Checking....... 349 Air conditioning filter ....370 If the vehicle has discharged Air conditioning battery ........
Page 503 Alphabetical index Child safety ........ 54 Airbag precautions....35 Care........320, 324 Battery precautions..351, 442 Aluminum wheels....321 Child restraint system ..... 55 Exterior ......... 320 How your child should wear Interior........324 the seat belt......28 Seat belts......325 Installing child restraints ..
Page 504 Alphabetical index Daytime running light Eco Driving Indicator ....85 system........187 Electric Power Steering Deck board ....... 308 (EPS) ........279 Warning light......409 Defogger Outside rear view Electronic key ......98 mirrors ........ 293 Battery-saving function ..120 Rear window ......
Page 505 Alphabetical index Emergency flashers ....396 Engine........452 Flat tire ........423 ACCESSORY mode ..... 166 Floor mats ........22 Compartment ......341 Fluid Engine switch....162, 165 Brake ........455 Hood ........338 Continuously variable How to start the transmission .......
Page 506 Alphabetical index Gauges ........86 I/M test ........334 Glove box ......... 304 Identification ......450 Engine ........451 Grocery bag hooks....307 Vehicle........450 Ignition switch (engine switch)....162, 165 Head restraints ......130 Illuminated entry system ..302 Headlights ........
Page 507 Alphabetical index Jack Lane Departure Alert (LDA) ..226 Positioning the jack....340 Language ........92 Vehicle-equipped jack... 424 LDA (Lane Departure Alert) ..226 Jack handle ......424 LATCH anchors ......57 Jam protection function Lever Power window....... 141 Auxiliary catch lever....
Page 508 Alphabetical index Maintenance Noise from under vehicle ... 6 Do-it-yourself maintenance... 335 General maintenance ... 330 Maintenance data ....450 Odometer ........86 Maintenance requirements ...... 327 Engine oil......452 Reset the maintenance Opener data ........328 Back door ......113 Malfunction indicator lamp..
Page 509 Alphabetical index Parking brake......177 Radiator........346 Operation ...... 177, 178 Rear interior light ....301 Parking brake engaged Rear seat warning buzzer/message ... 180 Folding down ......128 Warning light......410 Rear turn signal lights .... 176 Replacing light bulbs .... 385 Parking lights......
Page 510 Alphabetical index Sensor Automatic headlight Seat belt reminder light... 411 system........ 187 Seat belts........26 Automatic High Beam Adjusting the seat belt .... 27 system........ 190 Automatic Locking LDA (Lane Departure Retractor (ALR) ....28 Alert)........226 Child restraint system PCS (Pre-Collision installation ......
Page 511 Alphabetical index Snow tires ........ 285 Switches Audio remote control Spare tire ........423 Inflation pressure ....456 switches ......317 Storage location....424 Automatic High Beam switch ......... 190 Spark plug ........ 454 Brake hold switch ....182 Specifications ......450 Cruise control switch ....
Page 512 Towing eyelet ....... 402 Engine immobilizer system ..74 Trailer towing ......160 Tire inflation pressure..... 363 Maintenance data ....456 Toyota Safety Sense P.... 204 Automatic High Beam... 190 Warning light......411 LDA (Lane Departure Tire information ....... 461 Alert)........
Page 513 Alphabetical index Warning lights ......79 ABS ........409 Vanity lights ......313 Brake Override System ..412 Wattage ........ 457 Brake system....408, 410 Vanity mirrors ......313 Charging system....408 Vehicle data recording ....7 Electric parking brake ... 410 Vehicle identification Electric power steering number ........
Page 514 Alphabetical index Warning messages....418 Washer......195, 198 Checking....... 352 Preparing and checking before winter....... 285 Switch ......195, 198 Washing and waxing ....320 Weight........450 What to do if... (Troubleshooting) ....498 Wheels ........367 Replacing......367 Size........456 Window glasses.......
Page 515 Alphabetical index C-HR_OM_USA_OM10526U...
Page 516 GAS STATION INFORMATION Fuel filler Auxiliary catch lever Fuel filler door door opener P. 338 P. 202 P. 202 Hood lock release Tire inflation pres- lever sure P. 456 P. 338 Fuel tank capacity 13.2 gal. (50 L, 11.0 Imp.gal.) (Reference) Fuel type Unleaded gasoline only...

Save PDF