Placing A Call On Hold; Muting A Call; Paging - Toshiba DP 5000 Series Quick Reference Manual

Hold
To place a call on Hold
1. To place a call on Hold, press the "Hold" button.
2. To return to the held call, press the held line's flashing line or Intercom button.
If you do not return to the held call after a few minutes, the call begins to ring back to your phone.
If you are busy on another call, you hear two tone bursts. If the held party hangs up, the call is released.
To place a call on Exclusive Hold
1. While on a call, press Hold twice. This places the call on Exclusive Hold; no one else will be able to
access that line.
Microphone Mute Button
Mute on the DP5000-series telephones mutes not only the microphone but also the handset
microphone as well. The MIC button on the telephones toggles between Mic and Mute.
To Mute a Call
1. During a conversation, press the "Mic" key, the red indicator will turn off; the microphone and
handset are muted.
2. Press the "Mic" key again to resume communication, the red indicator will turn on.

Paging

To make an All Call Page
1. With the handset off-hook, press the All Page button. This pages all phones in the All Call Page Group,
and may page external speakers (depends on programming).
2. Make your announcement, then hang up.
NOTE: The page button will be one of your programmable feature buttons, and its location may vary between
different phone systems. Not all systems may have this feature enabled.
.
.
.
5