Using Bluetooth - SWAGTRON SwagRoller User Manual

Step 2: While pressing the buttons, push the handle down until the draw-bars are fully retracted. The
handle will click into place.
®

2.2 Using Bluetooth

1. Power on the SwagRoller™ to automatically turn on Bluetooth®.
2. Using your mobile device, turn on Bluetooth®, make it "discoverable" if needed, then search. The
device name "SwagRoller music" should appear.
3. Select "SwagRoller music" to begin connecting if you would like to play music on your
SwagRoller™. The SwagRoller™ will make a sound to indicate that your device has been successfully
paired .
4. After successfully pairing your SwagRoller™ and your device, you may begin playing music at any
time.
5. To end the connection between the devices, turn off Bluetooth® on your mobile device. The
SwagRoller™ will make a sound to indicate that the devices have been successfully disconnected.
®
Bluetooth Specification: Bluetooth
Speaker Specification: 8 5W
• Powering on the SWAGTRON™ will automatically enable Bluetooth
and stay enabled as long as the SWAGTRON™ is powered on.
• Some mobile devices immediately become "discoverable" once Bluetooth
instructions of your Bluetooth
• As with most Bluetooth
distance from one another. The connection may be terminated or fail to work properly if the connected
devices are too far apart.
SWAGTRON SwagRoller Self Balancing Unicycle
®
V4.0+EDR
-enabled device for any trouble with this feature.
®
devices, it is recommended to keep the connected devices within a reasonable
®
i.e. Bluetooth will become enabled
® ®
is activated. Please check the
®
7
ENGLISH