JBL Control 29AV-1 Manual

Control 29AV-1
Professional Series

Key Features:

Extremely smooth, fl at frequency
response with extended bandwidth.
110° x 85° HF coverage, rotatable horn.
110 Watt transformer for 70V or 100V
lines, with 8Ω thru.
™
SonicGuard overload protection.
200 mm (8 ) Kevlar cone woofer,
25 mm (1 ) titanium diaphragm
compression driver.
™
Includes InvisiBall mounting hardware,
plus ten 6 mm attachment points for
suspension and optional U-bracket.
Sealed input panel cover and screw-
down input terminals.
®
The Control 29AV-1 provides improved
voicing for extremely fl at, high fi delity
performance, extended bandwidth and
well-controlled defi ned coverage from a
compact loudspeaker.
The rotatable high-frequency horn
allows use of the speaker in either vertical
or horizontal orientation. Consistent
coverage ensures excellent sound
character throughout the listening area.
Moderate magnetic shielding allows use
of the speaker as close as 230 mm (9 ) to
video monitors.
The top-quality line distribution
transformer, designed for minimal insertion
loss and reduced saturation, allows
use of either 70V or 100V distributed
speaker lines. In bypass position, the 8Ω
impedance allows use of multiple speakers
on a loudspeaker line.
The included InvisiBall mounting
method is simple to install, aims easily and
provides a high degree of theft deterrence.
InvisiBall allows horizontal rotation of up
to 41° off-axis and vertical rotation of up
to 36° (horn end inward) or 23° (woofer
end inward). Attachment points for the
optional MTC-29UB U-bracket allows for
compact installation.
Weather resistance has been maximized.
The woofer's cone is made of kevlar,
surround is pure butyl rubber, and the
driver basket is rear loaded to minimize
direct exposure. The compression driver's
diaphragm is pure titanium. The grille is
thermoset composite coated and comes
with foam to minimize incursion of water.
Nickel/zinc rust-resistant terminals ensure
a secure input connection. An MTC-PC2
sealed-entrance cover is included to
further protect the speaker's terminals.
JBL's exclusive SonicGuard overload
protection is virtually inaudible to the
listener, ensuring reliability while
providing full fi delity sound.
Available in black or white (-WH). The
cabinet will accept a variety of paints to
match any décor.
®
Specifi cations:
Frequency Range (-10 dB)
Frequency Response (± 3 dB)
100 Hr Power Capacity
Maximum SPL @ 1m
Nominal Sensitivity
Nominal Coverage Angle
Directivity Factor (Q): 6.7, averaged 500 Hz to 16 kHz
Directivity Index (DI): 8.3 dB, averaged 500 Hz to 16 kHz
Nominal Impedance: 8 ohms
Minimum Impedance: 6.3 ohms @ 230 Hz 3.3 ohms @ 4.1 kHz
Crossover Type: 3rd order High Pass, 2nd order Low Pass with
Transformer Taps: 70V: 110W, 55W, 28W & 14W
Recommended High-Pass: See chart
Transducers:
Low Frequency: 200 mm (8 in) kevlar cone with pure butyl rubber
High Frequency: 25 mm (1 in) compression driver, pure titanium
Physical:
Enclosure Material: High impact polystyrene
Overload Protection: Full-range power limiting to protect network and
Environmental: IEC 529 IP-X4 splashproof rating. Exceeds MilSpec
Termination: Screw-down terminal strip, zinc plated copper
Safety Agency Rating: Transformer is listed per UL1876.
Dimensions (H x W x D): 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in)
Net Weight (ea): 12.2 kg (26.8 lbs)
Shipping Weight (ea): 14.0 kg (30.8 lbs)
Included Accessories: 1 pc MTC-PC2 input panel cover, InvisiBall
Optional Accessories: MTC-29CM to install speaker down from the ceiling
1 In Half-space.
2 Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous
program power is defi ned as 3 dB above the Continuous Pink Noise Rating and is a conservative expression of the system's
ability to handle normal speech and music program material.
3 Calculated from sensitivity and power handling. Power compression not considered.
4 Half-space, averaged 100 Hz to 10 kHz
JBL continually engages in research related to product improvements. Changes introduced into existing products without
notice are an expression of that philosophy.
Premium Indoor/Outdoor
Monitor Speaker
1
: 37 Hz –18 kHz
1
: 43 Hz – 15 kHz
2
: 300 Watts Continuous Program Power
150 Watts Continuous Pink Noise
3
: Short-Term: 118 dB; Long-Term: 112 dB
4
: 90 dB, 1W @ 1 m (3.3 ft)
5
: 110° H x 85° V, rotatable
impedance compensation, 2.5 kHz crossover
frequency
100V: 110W, 55W, & 28W
Thru Position: 8Ω nominal
surround, 50 mm (2 in) voicecoil on fi berglass
former
diaphragm with patented JBL diamond surround
Grille: Thermoset composite coated steel
transducers. Serviceable internal fuse to protect
during extreme overload conditions.
810 for humidity, salt spray, temperature & UV.
Passes Mil-Std-202F for salt spray.
base, nickel plated metal screws/washers. Accepts
up to 9 mm outside 4 mm inside open lug (#6, #8
or #10 lug), plus bare wire (up to 12 AWG/2.5 mm
Colors: Black or white (-WH)
mounting base, 6 mm x 260 mm InvisiBall Hex
wrench.
MTC-29UB U-bracket
5 2 kHz to 14 kHz
2
).