Related Manuals for JBL Control 226C/T
Summary of Contents for JBL Control 226C/T
- Page 1 2 0 0 S e r i e s ® C o n t r o l 2 2 6 C / T ® C o n t r o l 2 2 7 C User’s Guide ® C o n t r o l 2 2 7 C T...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Product Description............1 Product Feature Identification........2 Control 226C/T Preparation........3 Control 226C/T Installation........4 Wiring Instructions..........5-6 Control 227C/CT Back Can Assembly.......7 Grilles, Maintenance & Contacting JBL....8 Specifications..............9 JBL Professional Control 200 Series... -
Page 3: Product Description
Control 226C/T - An integrated backcan and coaxial design that features a 6.5” Kevlar-reinforced cone on the woofer coupled with a 1” exit Compression Driver. The Control 226C/T also includes a multi-tap transformer for use on 70V or 100V line distribution systems. -
Page 4: Product Feature Identification
Compression Driver Crossover Transformer Network Crossover Tuning Port Network Tube Dust Cap Woofer Baffle Woofer (Control 226C/T) Transformer Tap / Bypass Integrated Back Can Tuning Port Two Step Dog Ear Woofer Dust Cap Baffle 2 JBL Professional Control 200 Series... -
Page 5: Control 226C/T Preparation
Control 226C/T PREPARATION The installation of the Control 226C/T can be accomplished, 2) The optional PLASTER-RING BRACKET or “mud ring” if necessary, without requiring access above the ceiling. (MTC-19MR) contains a circular offset, forming a edge guide Bracketry for use with either suspended ceilings or sheetrock for sheet rock plastering. -
Page 6: Control 226C/T Installation
Thick-Ceiling Dog-Ears Second Landing – The Control 226C/T is equipped with a two-landing dog ear suspension system enabling the Control 226C/T to be used with ceiling tiles that are up to 2.75” (70 mm) thick. -
Page 7: Wiring Instructions
Connecting the Input Terminal Block on the Control 226C/T -- The input terminal cover on the Control 226C/T On the Control 226C/T, connect the negative wire to the “-” is fitted with a conduit connector for running and securing or pin 2 and connect the positive wire to “+” or pin 1. Pins 1 wiring or conduit to and from the unit. - Page 8 227C, Pins A & B on Control 226C/T) -- By connecting label located on the crossover frame. the wire pair of the subsequent speaker to pins 2 & 3 on the Control 227C and Pins A & B on Control 226C/T, then Control 227C: CONNECTION all subsequent speakers will be disconnected when this speaker’s connector is disconnected during troubleshooting .
-
Page 9: Control 227C/Ct Back Can Assembly
JBL Professional grilles.) assembly. CAUTION: WHEN INSTALLING CONTROL 200 SERIES BACK CANS INTO A CEILING OR BUILDING STRUCTURE, ALWAYS USE PROPER SUSPENSION AND RIGGING PRACTICES IN ACCORDANCE WITH YOUR AREA’S BUILDING CODES AND REGULATIONS. JBL Professional Control 200 Series... -
Page 10: Grilles, Maintenance & Contacting Jbl
If the grille is rolled or brush painted, the grille perforations may become clogged with paint and poor sound quality may result. When painting the Control 226C/T grille, remove the backing grille cloth to avoid paint clogs or diminished sound quality reproduction. -
Page 11: Specifications
Average 1 kHz to 16 kHz IEC standard, full bandwidth pink noise with 6 dB crest factor. JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy. JBL Professional Control 200 Series... - Page 12 2 0 0 S e r i e s 8500 Balboa Boulevard Northridge, CA 91329 USA 363947-002 12/06 Visit us online at www.jblpro.com...
Need help?
Do you have a question about the Control 226C/T and is the answer not in the manual?
Questions and answers